They realised it was the most efficient and effective form of heating, this is as true today as it was then. The Fired Earth range of electric systems take the Roman genius into the modern era, enabling underfloor heating to be laid simply and efficiently in new and existing buildings. Fired Earth have systems that can be used as the sole source of heating or simply just to warm an otherwise cold floor. They are suitable for use with all Fired Earth floor tiles. Electrical Heating There are many benefits underfloor heating system: • All our cables are double insulated an internal earth sheathing. The systems have been tested and comply with worldwide standards and regulations. • They are very thin usually adding only 5mm in total to the depth of the floor. • They are 100% efficient. • They free up valuable wall space. • They are fully controllable with rapid response times when installed with suitable thermal boards and are run independently of your central heating system. • Radiant heat reduces drafts and is more effective than convective heating. • They are simple and quick With an extensive range of systems you can install electric heating in any size room or location. Electric underfloor heating is an affordable luxury Buying and installing underfloor heating is easy, all you need is the correct size heating mat, a programmable Thermostat and an RCD (this is not required if you already have one on your main electricity board). All installations should be surveyed by a suitably qualified electrician to check for the availability of sufficient supply and that the installation will meet current IEE regulations. Fired Earth Underfloor Heating There are three types of underfloor heating available. The descriptions below will help you choose the most suitable type for your particular installation. Floor Warming mat – setting the standard in underfloor heating. Provides comfortable warmth in all Fired Earth tiled floors. Sole Source heating – a system powerful enough to be the sole form of heating even in a conservatory. Bathroom Mat – an earth braided system for use in all bathrooms including ‘wet’ areas. For your convenience, a full estimating and installation service is available. Simply give drawings to your local store. The Fired Earth range is designed for use under tiled floors only. Floor Warming Mat 160 watts/m2 This mat makes a warm affordable luxury, making any tiled surface in any room a joy to walk on. It is widely accepted that heating mats superior to loose cable systems, as they are much quicker to install and have regulated cable widths, so you always get a good even heat spread with no hot or cold spots. • Fabric backing for better installation • Powerful 160 watts/m2 output to warm even the thickest tile • Only one connection cable for easy installation • Adds only 5mm to the floor depth • Surpasses international safety standards Sole Source Heating 200 watts/m2 The Sole Source mat has been designed for sole source of heating in conservatories, extensions and other areas. At 200 watts/m2 this mat system is one of the most powerful on the market. The system: • Is ultra thin, adding only 5mm to the floor depth • Is available in 500mm width • 10 year guarantee • No electro magnetic The Floor Warming mat has a fabric backing allowing adhesives absorbed, thereby allowing a perfect between the tiles and subfloor. Technical Data Floor Warming mat Operating voltage: 230/240v Output: 160 watts/m2 Width: 500mm Size: 2-10m2 Guarantee: 10 years • Can be installed either directly beneath the tiles or in the screed for off peak electricity use. If using underfloor heating for sole source heating, it is very important to have insulation either under the screed or directly below the heating. To make sure the heat output is sufficient we offer a free planning service, whereby we can calculate both the heat requirement of the area and that needs to be installed. may be that additional Bathroom Mat 160 watts/m2 Although any of our underfloor heating products are suitable for use in bathrooms we have developed a system which is specifically designed for wet bathrooms. This system is easy to install, extremely robust and available in 300mm widths giving a better floor coverage around bathroom furniture. It is ultra thin, adding only 5mm to the depth of the floor and is rated at a powerful 160 watts/m2. This system has been designed with a completely unique external earth braid and grid system to comply with all forthcoming Technical Data Sole Source Heating Operating Voltage: 230/240v Output: 200 watts/m2 Width: 500mm Size: 2-8m2 Guarantee: 10 years European and International guidelines and directives. This is the safest underfloor heating system in the world. • Ideal for bathrooms as they quickly dry wet floors. • Fitted with unique external earth braid for additional safety even in shower areas. • 300mm wide for better coverage and easier installation. • Fabric backing for better installation. Technical Data B...