For best performance, place the handset in the telephone base to charge for at least 16 hours before first use. ^ NOTES: 1. Use only the power adapter supplied with this product or equivalent. To order a replacement power adapter, visit our website at or call 1 (800) 222-3111. In Canada dial 1 (866) 288-4268. 2. Be sure to use an electrical outlet not controlled by a wall switch. 3. This power adapter is intended to be correctly oriented in a vertical or floor mount position. 4. If you rece

When in idle mode, press to display directory entries. While entering names, press to advance the cursor. During a call, press DIRA to increase listening volume. ^OFF/CLEAR During a call, press to hang up. While using menus, press to cancel an operation, or exit the menu. MENU/SEL/TRANSFER Press to display a menu or to confirm a command. During a call, press to transfer a call between handsets. MUTE While on a call, press to mute microphone. Press again to resume. REDIAL/PAUSE While in i

For best performance, place the handset in the telephone base or charger to charge for 16 hours before use. You can keep the battery charged by returning the handset to the telephone base or charger after use. When the battery is fully depleted, a recharge takes about 12 hours. The average talk time on a fully charged battery is about five hours, and the standby time is approximately six days. Actual battery life depends on usage conditions and age of battery. 1. Insert the plug as indicated.

MENU/SELECT Press to display the menu. Once in the menu, press to select an item or save an entry or setting. OFF/CLEAR During a call, press to hang up. While using menus, press to cancel an operation, back up to the previous menu, or exit the menu display. Press and hold while the handset is not in use to erase the missed calls indicator. CID/VOLUME Press to scroll down while in menus. Press to decrease the listening volume. Press to show the caller ID history when the handset is not in use. Wh

The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters. The telephone base comes ready for tabletop use. If you want to mount your telephone on a wall, refer to Wall mount installation in the user’s manual for details. Electrical outlet not controlled by a wall switch Telephone wall jack A DSL filter (not included) is required if you have DSL high-speed Internet service. Plug the small end of th

Install the telephone base close to a telephone wall jack and an electrical outlet not controlled by a wall switch. The telephone base can be placed on a flat surface or vertically mounted on the wall (see Wall mount installation in the user’s manual). For optimum range and better reception, place the telephone base in a central and open location. If you subscribe to high-speed Internet service (DSL - digital subscriber line) through your telephone line, you must install a DSL filter between the

/DELETE Press to delete the message currently playing. Press twice to delete all old messages when the telephone is not in use. Answering system settings - announcement The announcement is the greeting callers hear when calls are answered by the answering system. The telephone has a default announcement, “Hello. Please leave a message after the tone.” You can use this announcement, or record your own announcement. You can record an announcement up to 90 seconds. The system does not record any an

For best performance, keep the handset in the telephone base or charger when not in use. The battery is fully charged after 16 hours of continuous charging. If the screen is blank, you need to charge the handset without interruption for at least 30 minutes to give the handset enough charge to use the telephone for a short time. The screen shows Low battery until you have charged the battery without interruption for at least 30 minutes. The following table summarizes the battery charge indicators

When the handset is ringing, press to mute the ringer temporarily. Press and hold while the telephone is not in use to erase the missed call indicator. PHONE/FLASH Press to make or answer a call. During a call, press to answer an incoming call when you receive a call waiting alert. During message playback, press to call back the caller if caller’s number is available. # (pound key) Press repeatedly to display other dialing options when reviewing a caller ID log entry. EQ During an outside call,

Ringers >Set date/time p q SET DATE MM/DD/YY p q SET TIME HH:MM -- p q Ringers >Set date/time p q SET DATE MM/DD/YY p q SET TIME HH:MM -- p q Telephone operation Making a call Using a cordless handset: Press PHONE/FLASH or /....K..SPEAKER, then enter the telephone number. The screen displays the elapsed time as you talk (in hours, minutes and seconds). Using the telephone base: Press /....K..SPEAKER, then enter the telephone number. The screen displays the elapsed time as you talk (in hours, min