Gross capacity does not include the effect of fan motor heat. **Rated in accordance with ARI Standard 360-2000 EVAPORATOR FAN PERFORMANCE MODEL # SUPPLY CFM EXTERNAL STATIC PRESSURE - Inches W.C. 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP DPV096 3000 734 0.76 B09 0.B9 BB1 1.02 950 1.17 1016 1.32 1079 1.47 1139 1.63 1196 1.79 1251 1.97 1303 2.17 3200 771 0.90 B43 1.03 911

Only utility and duct connections are required at the point of installation. Field-installed electric heater accessories are available to provide electric heat, if required. ISO 9001 Certified Quality Management System FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE 333495-YTG-C-0908 Table of Contents Description ............................................................................................ 1 Table of Contents...............................................

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 FACTORY-INSTALLED OPTION . . . . . . . . . . . . . . . 4 FIELD-INSTALLED ACCESSORIES. . . . . . . . . . . . . 4 MECHANICAL SPECIFICATIONS . . . . . . . . . . . . . 24 LIST OF FIGURES Fig.Pg. 1SUNLINE ULTRA CUTAWAY (MODEL DHG GAS HEATING). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 2FIELD POWER WIRING. . . . . . . . . . . . . . . . . . . . . . .

MBH POWER INPUT SENSIBLE CAPACITY ENTERING DRY BULB, °F ENTERING DRY BULB, °F CFM WB °F 86 83 80 77 74 71 68 86 83 80 77 74 71 68 2500 72 82 4.3 56 50 43 37 30 - - 76 4.6 54 48 41 34 28 - - 67 70 4.2 67 61 54 48 41 34 28 65 4.5 65 58 51 45 38 31 25 62 67 4.0 67 67 66 59 52 46 39 62 4.5 62 62 62 55 49 42 35 57 66 4.0 66 66 66 59 52 46 39 61 4.4 61 61 61 54 47 41 34 2250 72 78 4.3 53 47 41 35 29 - - 73 4.6 50 44 38 32 26 - - 67 67 4.2 63 57 51 45 39 33 27 62 4.5 60 54 48 42 36 30 24 62 64 4.0 64 6

All models have independent refrigeration circuits for efficient part load operation. Although the units are primarily designed for curb mounting on a roof, they can also be slab-mounted at ground level or set on steel beams above a finished roof. All ZJ/ZR/ZF units are self-contained and assembled on rigid full perimeter base rails allowing for overhead rigging. Every unit is completely charged, wired, piped, and tested at the factory to provide a quick and easy field installation. All models (

1 Installation........................................ 3 Limitations.................................... 3 Location........................................ 5 Rigging And Handling............................. 5 Ductwork....................................... 9 Roof Curb...................................... 9 Filters......................................... 9 Condensate Drain................................ 9 Service Access................................. 10 Thermostat.................

2. These ratings include the compressor and the condenser fan motors but not the supply air blower motor. The total condenser fan motor power input is 0.36kW. Refer to the SUPPLY AIR BLOWER PERFORMANCE Table for the kW of the supply air blower motor. NOMINAL RATING Unitary Products Group 255040-YTG-A-0506 TABLE 7: D(CE, CG)072 COOLING CAPACITIES (6 TON) AIR ON EVAPORATOR COIL TEMPERATURE OF AIR ON CONDENSER COIL 85°F 95°F TOTAL CAP.1 MBH POWER INPUT2 kW SENSIBLE CAPACITY1 TOTAL CAP.1 MBH POWER I

Economizer 50 Motorized Damper 26 Electric Heater 5 - 7 kW 18 10 - 15 kW 23 20 - 30 kW 28 Roof Curb 92 Barometric Relief / Fixed Air Damper 10 Belt-Drive Blower 5 FIGURE 11 -ROOF CURB DIMENSIONS Unitary Products Group 255040-YTG-A-0506 30 Unitary Products Group FIGURE 12 - COOLING UNIT WITH GAS HEAT CONTROL CIRCUIT 208/230V AND 460V DIAGRAM 255040-YTG-A-0506 Unitary Products Group 31 FIGURE 13 - COOLING UNIT WITH GAS HEAT CONTROL CIRCUIT 575 VOLT DIAGRAM 255040-YTG-A-0506 32 Unitary Products Gro

HEATER KW HEATER AMPS MIN. CIRCUIT AMPACITY (AMPS) MAX. FUSE/ BRKR1 SIZE (AMPS) RLA EACH LRA EACH D(CE, CG) 060 (5.0) 208-3-60 16.0 125.0 1.3 5.2 None -- 26.5 35 2CE045105252 4 11.1 26.5 35 2CE045107252 5.6 15.5 26.5 35 2CE04511025 8 22.2 34.3 40 2CE04511525 11.9 33.0 47.8 50 2CE04512025 15.9 44.1 61.7 70 2CE04513025 22.2 61.6 83.5 90 230-3-60 16.0 125.0 1.3 5.2 None -- 26.5 35 2CE045105252 5.3 12.7 26.5 35 2CE045107252 7.5 18.0 29.1 40 2CE04511025 10.6 25.5 38.4 40 2CE04511525 15.9 38.2 54.3 60

On applications where height is limited, the 2-3/8 inch high base rails may be removed on location. MORE ATTRACTIVE APPEARANCE A single piece “Water Shed” top cover containing a top discharge condenser fan arrangement requires less square footage on installation and provides a wider variety of installations. The one piece design adds greater water integrity. Rounded corners with water drip edges add to the attractive appearance. The cabinet panels have a non-fibrous insulation that reduces ins