Safety Precautions Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to

This recorder is only compatible with DV-format (DVC-SD, DV25) camcorders. Digital satellite tuners and Digital VHS video recorders are not compatible. You cannot connect more than one DV camcorder at a time to this recorder. You cannot control this recorder from external equipment connected via the DV IN jack (including two recorders). It may not always be possible to control the connected camcorder via the DV IN jack. Digital camcorders can usually record audio as stereo 16-bit/48kHz, or twin

I’m away from my phone now, but I will check my mailbox regularly. Leave me a message, and I‘ll return your call as soon as possible, Thanks”. Remember, dial 1 for YES, 2 for NO Table of Contents General Information Getting Started Call Forward Settings Calling Your Voice Mailbox Checking Messages Leaving Messages Reviewing Messages Changing Your Setup Options Quick Transfer to Voicemail Transferring a Call Directly to a Voice Mailbox Live Record Programming Live Record Function Keys Live Monito

Rear of the recorder AUDIO INPUTVIDEO INPUT PrPbY COMPONENT VIDEO INPUT Rear of TV AVC S-VIDEO INPUT S 11 Hookup andSettings Connections to Your TV Make one of the following connections, depending on the capabilities of your existing equipment. Tips Depending on your TV and other equipment you wish to connect, there are various ways you could connect the recorder. Use only one of the connections described below. Please refer to the manuals of your TV, VCR, Stereo System or other devices as neces

installing and using this appliance, Manual SWING TIMER ON/OFF MODE FAN SPEED F HR Window (Room) Air Conditioner User Manual RWC-3217 RWC-4717 CONTENTS Safety Precautions 2 Parts Name 3 Operating Instructions 5 Care and Maintenance 8 Operation Tips 9Trouble Shooting 10 11 Installation Instructions 1 SWING OFFON/MODE TIMER FAN SPEED F HRHR 2 Symbols in this User's Manual are interpreted as shown below: Be sure not to do. The feature of the appliance, instead of a fault. Pay attention to such a si

The remote control will operate the air conditioner at a distance of up to 23 feet when pointing at signal receptor of indoor unit. Signal receptor SWINGSWING OFF ON/ MODE TIMER FAN SPEED F HRHR 7 Operating Instructions 8 Unplug from power source Front panel maintenance Air filter maintenance Take out air filter as shown Stop operation and take out air filter. Wipe with a soft and dry cloth Use lukewarm water (below 40 C) to clean if the air conditioner is very dirty. Unplug from power source af

Operation is subject to the following two conditions. not cause harmful interference, and (2) this device must accept any interference received, including cause undesired operation. U.S. Responsible Party: NEC Technologies, Inc. Address: 1250 N. Arlington Heights Road Itasca, Illinois 60143 Tel. No.: (630) 467-5000 Type of Product: LCD Projector Equipment Classification: Class B Peripheral Models: GT1150 We hereby declare that the equipment specified above conforms to the technical standards as

What’s in the Box? and the Names of the Projector Parts 1-1. Features • Compact projector for dedicated use with DLP Cinema® We have made the projector and the lamp console into one unit and achieved a quite compact projector exclusively used for DLP Cinema®. • Various setups possible thanks to a variety of optional lens units and the facility for invertedinstallation The DLP Cinema® projector is provided with a lens memory function for storing lens zoom positions and shift positions to set scre

Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclam

2. Any product on which the serial number has been defaced, modified or removed. 3. Normal decrease in lamp light output over time. 4. Damage, deterioration or malfunction resulting from: a. Accident, misuse, abuse, neglect, improper ventilation, fire, dust, smoke, water, lightning or other acts of nature, unauthorized product modification, or failure to follow instructions supplied with the product. b. Repair or attempted repair by anyone other than a NEC Solutions authorized service center. c.