This symbol is intended to alert the user of the presence of uninsulated dangerous voltage within the product’s enclosure that may present a risk of electric shock. Caution Read Instructions • Read and understand all safety and operating instructions before using the equipment. Retain Instructions • The safety instructions should be kept for future reference. Follow Warnings • Follow all warnings and instructions marked on the equipment or in the user information. Avoid Attachments • Do not use

The button changes to Save. 3. Enter your MGP 464’s IP address and your domain name in the appropriate fields. (This information is available from your network administrator.) 4. If your MGP has a password assigned, enter it. 5. Click the Save button. To set up e-mail addresses for notification, do the following for each recipient of e-mail alerts: 1. Click the Edit button at the right end of the address row. The Edit button changes to Save. 2. Enter the e-mail address of the recipient, and the

X4$ = Number of bytes to read X4% = E-mail event number (1 - 64) X4^ = E-mail recipient’s address X4& = Name of e-mail file to be sent First line of the file is the subject. The rest is the body of the e-mail. X4( = Default name: a combination of the model-name and the last 3 character pairs of the unit’s MAC address (e.g., MGP-464-00-02-3D) X5! = Extended security (password) levels: 1-10 The response is returned as two digits with a leading zero. X5@ = Connection’s security level 0 = anonymous

Increase the active pixels. Decrease the active pixels. Show the active pixels. Adjust the active lines to specified value. Increase the active lines. Decrease the active lines. Show the active lines. Enable Film Mode (auto senses for 3:2 or 2:2 pull down) Disables Film Mode (locks de-interlacer to 2:2 pull down). View the currently displayed film mode setting. (0= disabled, 1= enabled) Set input aspect ratio to 16:9. Set input aspect ratio to 4:3. View the current input aspect ratio. (0= 16:9,

Input presets (on input 4 only) save input configuration, picture control, and OSD (on-screen display) text. Auto image™ — Auto image automatically sizes, centers, and optimizes the image to that of the scaled output rate, filling the window with the image. IP Link® — IP Link-enabled products offer an integrated Web server with high performance architecture, global compatibility with industry standard Ethernet communication protocols, multi-user support, and a Web-based asset management applicat

• Line 2 displays the input type. • Line 3 displays a text label that you can define (input 4 only). The display time can be set from 0 to 5 seconds in 1 second steps (default is 2 secs). Test pattern Test patterns are useful when the DVS 304 is used to output differing resolutions. Choose a test pattern to properly adjust the image using built in crop, alternating pixels, and color bars. Enhance mode When the enhance mode is set to on, automatic gain control of the video input signal is enabled

It provides immediate system information, power status and serial port settings for the DVS 304 unit. Figure 4-2 — System Status page DVS 304 • Ethernet Control 4-3 Ethernet Control, cont’d Configuration The Configuration tab includes pages that show the current system settings, scaler settings, passwords and firmware upgrade data for the DVS 304 series. System Settings page The Systems Settings page (figure 4-3) consists of fields where you can view and edit IP administration and system setting

Supports DDC and HDCP copy protection transmission — The Tx/Rx pairs fully support long distance transmission of the DDC and HDCP signals. Remote powering of transmitter or receiver — Only one power supply is necessary to power both devices. Control communications pass-through — Bidirectional RS-232 or IR control signals can be transmitted alongside the HDMI signal, so that the remote display can be controlled without the need for additional cabling. Audio routing — The HDMI 201 A D Tx/Rx also r

Read Instructions. All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions. The safety and operating instructions should be retained for future reference. 3. Heed Warnings. All warnings on the product and in the operating instructions should be adhered to. 4. Follow Instructions. All operating and use instructions should be followed. 5. Cleaning. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol

Mute: Press this button to mute the HK 3485’s speaker and headphone outputs temporarily. To end the muting, press this button or adjust the volume. Muting is also canceled when the receiver is turned off. Speaker 1/2: Press the left side of this button to enable the HK 3485 to output audio to the speakers connected to the Speaker 1 Outputs, and press the right side of the button to enable the Speaker 2 Outputs. You may enable or disable both sets of speaker outputs simultaneously. This feature i