If you’re using the AC adapter, make sure it’s plugged into a live outlet. Q: I turned it on and now the screen just shows little dashes. A: This happens until your WeatherFX receives its first update from our network. If this continues for more than four hours, try moving your WeatherFX to another location where you can receive a stronger signal, as shown on the signal strength indicator. Q:Only part of the screen is showing any data. A: Data is sent to your WeatherFX in discrete parts, so if y

Carolina RALEIGH NC RALEIGH NC RALEIGH RALEIGH N. Carolina WILMINGTON NC WILMINGTON NC WLMNGTON WLMGTN N. Dakota BISMARCK ND BISMARCK ND BISMARCK BSMRCK Nebraska OMAHA NE OMAHA NE OMAHA NE OMAHA New Hampshire MANCHESTER NH MANCHESTER NH MNCHESTER MNCHTR New Hampshire NASHUA NH NASHUA NH NASHUA NH NASHUA New Jersey TRENTON NJ TRENTON NJ TRENTON TRENTON New Mexico ALBUQUERQUE NM ALBUQUERQUE ALBQUQUE ALBUQUE Nevada LAS VEGAS NV LAS VEGAS NV LAS VEGAS VEGAS Location List (in order, by State/City) ST

You will typically see most (or all) of your area’s weather information appear on the display within the first 15 minutes, however the time it takes for the display to show all of the data on the larger models may take longer (up to a few hours after it is first powered on), and can vary depending on your location, so please be patient. After it receives the first full set of all data, your WeatherFX will continuously display weather information-updating temperature, forecast and other data auto

The next step is your choice-you may go to the NAV or SET page to select options or make personal settings first, or begin navigating by going directly to the MAP page. The simplest GPS function is to mark your present location. Any location that you choose to mark is called a “waypoint”. To set a waypoint at your current position, just press “OK” (center of the 5-way button). You will see the Waypoint Menu (Fig. 21a), with the default name assigned to the new waypoint (WPT000, WPT001, etc) show

deer) that you want distance to. Next, press and hold the POWER button and move the laser slowly over the deer until crosshairs surround the BullsEye indicator. If the laser beam recognized more than one object (i.e. deer and background trees), distance of the closer object (i.e. deer) will be displayed and crosshairs will surround the BullsEye indicator informing the user that distance to the closer object is being displayed in the LCD (as seen below). There may be times when only the laser bea

The Sky Tour handset will actually speak, giving you a personal real-time tour of the night sky each and every night. Each tour object will include directions associated with it to allow you to quickly find the object with your telescope. After reading through this manual and preparing for your observing session as outlined in these pages, you can start enjoying the Sky Tour feature by doing the following: After inserting 3 AA batteries, push and hold the “Constellation” button (the upper left h

Upon returning to the normal operating menu, the current compensation mode and unit of measure will be identified in the LCD as indicated below. SETUP menu Normal Operating Menu When the unit automatically powers down, operation will always return to the normal operation (i.e. away from SETUP) with the last used ARC mode active (i.e. BOW, RIFLE, or REGULAR) along with the last used TARGETING modes active (Standard SCAN, BULLSEYE, or BRUSH). If the unit turns off while in the SETUP menu, the unit

13 Espanol.......... 23 Deutsch.......... 33 Italiano........... 43 Portugues....... 53 TravelTunes 940001G-6LIM rev3.in3 3 2/17/07 3:13:03 PM ImpOrTaNT SafETy INSTruCTIONS 1. Read these instructions before operating the Bushnell TravelTunes™. 2. Keep the instructions for future reference. 3. Heed all warnings. 4. Follow all instructions 5. The speakers, battery compartment, and other parts of the TravelTunes are designed to be water resistant, and it is able to withstand a brief period of light

Make sure your external audio device is connected to the “aux in” jack on the back of the TravelTunes (not the headphone jack), using a 1/8”(3.5mm) “male to male” stereo cable (not included) plugged into the line out or headphone output of the audio device. Make sure the audio device is turned on and playing. Set the volume on the audio source to mid-level, and start with the volume set low on the TravelTunes, gradually increasing it to the desired level. If sound quality is poor, reduce the vol

. Turn on the iPod or connected audio device (if it is not already on), then press the power button ( ) on the top of the TravelTunes. The LED power indicator will come on, and glow green. The LED will turn red to indicate a low battery condition. . Press Play on the iPod or connected device, and adjust the listening level with the volume rocker switch located next to the power button on top of the TravelTunes. Press and release or hold down the end of the volume control marked “+” to increase t