Войти:
Скачали: 2   Размер: 4 mb   Производитель: Cub Cadet  
Категория: Газонокосилки

Скачали: 1   Размер: 4 mb   Производитель: Cub Cadet  
Категория: Газонокосилки

Скачали: 11   Размер: 4 mb   Производитель: Cub Cadet  
Категория: Газонокосилки

Скачали: 0   Размер: 97 kb   Производитель: Cub Cadet  
Категория: Газонокосилки
@name

The slots in the ends of the bar will fit over the spacers. Support the hood with an improvised prop rod. Install the screws that hold the hinge support bar to the dash support and instrument panel. Snap the hood support cylinder into place, and remove the prop rod. The remainder of the installation process is simply the reversal of the removal steps. 6

Скачали: 6   Размер: 97 kb   Производитель: Cub Cadet  
Категория: Газонокосилки
@name

Hood installation notes: See Figure 4.8. NOTE: Use this procedure for more extensive repairs. Typical reasons may include dash panel removal, or the need for more working room than simply removing the hood will provide. 4.1. Remove the battery: See Figure 4.1. Figure 4.1 • Disconnect the negative battery cable (black) first, using a 7/16” wrench. • Disconnect the positive battery cable (red) using a 7/16” wrench. • Remove the battery hold-down. • Lift the battery from the tractor. 4.2. D

Скачали: 0   Размер: 3 mb   Производитель: Cub Cadet  
Категория: Газонокосилки
@name

Therefore exercise extreme caution at all times. 3. Know the controls and how to stop the machine quickly. 4. Do not allow children to operate vehicle. Do not allow adults to operate it without proper instruction. Only persons well acquainted with these rules of safe operation should be allowed to use your mower. 5. Wear sturdy, rough-soled work shoes and close-fitting slacks and shirts to avoid entanglement in the moving parts. Never operate a unit in bare feet, sandals, or sneakers. 6. To

Скачали: 19   Размер: 5 mb   Производитель: Cub Cadet  
Категория: Газонокосилки
@name

Remove the belt guard. 3. Remove the front PTO drive belt from the double drive pulley, and replace with a new belt. 4. Install the double drive pulley belt guard in the same position noted in step 1. Secure the belt guard in proper position using the washer and bolt. When the PTO drive belt has been replaced, the mower deck reinstalled onto the tractor, and the front PTO drive belt positioned onto the engine drive pulley and the idler pulley, refer to "DOUBLE DRIVE PULLEY BELT GUARD ADJUSTME

Скачали: 2   Размер: 5 mb   Производитель: Cub Cadet  
Категория: Газонокосилки
@name

Use plenty of it. Worn parts can be expensive to replace. Keep your supply of lubricating oil and grease stored in clean containers, and covered to protect from dust and dirt. Keep the lubricating gun nozzle clean and wipe dirt from grease fittings before lubricating. The symbol in the illustration indicates the method of application and the hourly intervals to apply the lubricant. Use a pressure lubricating gun and apply 251H EP grease (or equivalent No. 2 multi-purpose lithium grease). Lub

Скачали: 0   Размер: 4 mb   Производитель: Cub Cadet  
Категория: Газонокосилки
@name

Move the PTO engagement lever forward slowly until the blades are turning. A WARNING: When the blades are engaged, keep feet and hands away from the discharge opening, the blades or any part of the deck. Be sure that the lawn is clear of stones, sticks, wire, or other objects which could damage lawn mower or engine. For best results and to insure more even grass distribution, do not mow when lawn is excessively wet. A WARNING: Elefore leaving the operator’s position for any reason, disengage

Скачали: 94   Размер: 8 mb   Производитель: Cub Cadet  
Категория: Газонокосилки
@name

The material has been prepared in detail to help you better understand the correct care and efficient operation of your tractor. Before you operate the tractor, study this manual carefully. New copies may be ordered from your dealer at a nominal price. Your local International Harvester dealer is interested in the performance you receive from this tractor. He has factory-trained servicemen, informed in the latest method of servicing tractors, modern tools, and original-equipment IH service part





Категории