Оценок - 4, средний балл: 4.8
(
)
)
|
Фрагмент инструкции
3. Unscrew the tightening nut 0, adjust the handle A to the correct length and tighten the nut 0 by hand. 4. Press and hold down the adjusting button B, set the cutting head 7 to the correct angle, then release the adjusting button B. 1. Press the start button C on the handle 3. The Turbotrimmer starts. 2. Release the start button C on the handle 3. The Turbotrimmer switches off. 1. For vertical cutting, loosen the tightening nut 8, turn the additional handle 6 180° and then tighten the nut 8 again by hand. 2. Swivel the plant guard D backwards to the park position until it clicks into place. 3. Lift the Turbotrimmer by the handle 3 and additional handle 6 and turn to the cutting position. 4. When trimming between paving stones, hold the Turbotrimmer so that the cutting filament moves slightly above the paved ground. The filament is lengthened automatically when the motor is running using a tip mechanism. A clean cut is only achieved with the maximum filament length. 3 2 2 1 4 5 6 7 6 B 9 8 A 0 Check your Turbotrimmer before each use v Always visually inspect your Turbotrimmer before each use. v Check that the ventilation slots are not obstructed in any way. Do not use your Turbotrimmer if the safety devices (push button, safety cover) and/ or the filament cassette are damaged or worn. v Never bypass the safety devices. v Inspect the area to be cut before you begin work. Remove any foreign objects (such as stones). Look out for foreign objects (such as stones) while you are working. v If you should come across an obstacle while cutting, turn off the Turbotrimmer. Remove the object and check the Turbotrimmer for any damage. If necessary have your Turbotrimmer repaired. Use / responsibility The Turbotrimmer can cause serious injuries. v Use the Turbotrimmer only for the purpose specified in these operating instructions. You are responsible for the safety in the area where you are working. v Ensure that there are no other people (especially children) or animals within or near the area where you are working. v Never use the Turbotrimmer if the safety devices are damaged or defective. Unplug the mains plug after use and check your Turbotrimmer, especially the filament cassette, regularly for damage. Have your Turbotrimmer repaired and/ or replace the filament cassette if necessary. v Always wear an eye shield or safety goggles! v Wear sturdy shoes and long trousers to protect your legs. Keep your fingers and feet away from the cutting filament – above all when starting work. v Always ensure that you have a secure foothold whilst working. v Keep the extension cable away from the area you are cutting. Take extra care when walking backwards. You may stumble ! v Only work in the daylight or when visibility is good. Interrupting work Never leave the Turbotrimmer unattended where you are working. v If you stop work, unplug the mains plug and store your Turbotrimmer in a safe place. v If you stop work in order to move to another part of the garden, always sw...
Эта инструкция также подходит к моделям:Газонокосилки - Lawn Mower (2.97 mb)
Газонокосилки - Lawn Mower (2.97 mb)
Газонокосилки - Lawn Mower (2.97 mb)
Газонокосилки - Lawn Mower (2.97 mb)