Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
v Always wear an eye shield or safety goggles! v Wear sturdy shoes and long trousers to protect your legs. Keep your fingers and feet away from the cutting filament – above all when starting work. v Always ensure that you have a secure foothold whilst working. v Keep the extension cable away from the area you are cutting. Take extra care when walking backwards. You may stumble ! v Only work in the daylight or when visibility is good. Interrupting work Never leave the Turbotrimmer unattended where you are working. v If you stop work, unplug the mains plug and store your Turbotrimmer in a safe place. v If you stop work in order to move to another part of the garden, always switch off the Turbotrimmer, wait until the tool stops and then unplug the mains plug. Familiarise yourself with the surroundings v Familiarise yourself with the surroundings and look out for possible dangers which you may not hear due to machine noise. v Never use the Turbotrimmer when it is raining or in damp, wet areas. v Do not operate your Turbotrimmer directly next to swimming pools or garden ponds. Electrical safety Check the power cord regularly for damage and signs of wear and tear. Do not use your Turbotrimmer if the power cord is damaged. v If the mains cord or extension cable is damaged while you are working, unplug the mains plug immediately. Do not touch the cable until the mains plug is switched off. The socket of the extension cable you are using must be waterproof. v Only use permitted extension cables. v Ask your electrician. For all portable units that are operated outdoors we recommend using a fault circuit breaker. In Switzerland the use of a residual-current device is obligatory. Starting your Turbotrimmer: Trimming along lawn edges and in awkward places: 6 8 3 3 C Cutting position Park position D D 3. Operation Risk of injury if the Turbotrimmer does not switch off when you release the start button. V Never bypass the safety devices (by binding the start button to the handle, for example). I E K M N J J L Replacing the filament cassette: 13 GB 12 GB Risk of injury! Pulling the filament out of the filament cassette: L K E 5. Trouble-Shooting Risk of injury from the cutting filament! V Always unplug the mains plug of the Turbotrimmer before troubleshooting. If a filament is drawn into the filament cassette you can pull it out again as described below. 1. Unplug the mains plug. 2. Remove the filament cassette as described under 4. Maintenance “Replacing the filament cassette” . 3. Press together the plastic ring L on the filament cassette E between your thumb and forefinger. 4. Draw the plastic ring L with the thumb of the other hand over the side part of the filament cassette E (use a screwdriver if necessary). You can now access the filament that was drawn into the filament cassette. 5. Unwind the filament K approximately 10 cm and thread it through the eye of the plastic ring L. If necessary, loosen the filament beforehand using a screwdriver. The filament ...
Эта инструкция также подходит к моделям:Газонокосилки - Lawn Mower (2.97 mb)
Газонокосилки - Lawn Mower (2.97 mb)
Газонокосилки - Lawn Mower (2.97 mb)
Газонокосилки - Lawn Mower (2.97 mb)