Оценок - 3, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
This function is useful for correcting existing old photographs, posters, etc. • Performing color restoration on an image causes a new (restored) 2M (1600 . 1200 pixels) size image to be stored as a separate file. 1. In the PLAY mode, use [..] and [..] to scroll through images and display the snapshot you want to correct. 2. Press [MENU]. 3. On the “PLAY” tab, select “Color Correction” and then press [..]. 4. Use [..] and [..] to select the photograph candidate you want. 5. Use [..] and [..] to select “Trim”, and then press [SET]. This displays a cropping boundary on the monitor screen. • To exit color restoration without storing anything, select “Cancel”. EDITING IMAGES 162 6. Use the zoom button to change the cropping boundary to the desired size. 7. Use [..], [..], [..], and [..] to move the selection boundary to the desired location and then press [SET]. The camera will correct color automatically and save the corrected image. • If you do not want a border around the resulting image, select and area that is smaller than the original image. • To exit color restoration without saving anything, press [MENU]. IMPORTANT! • If the original image is smaller than 2M (1600 . 1200 pixels) size, the new (restored) version will be the same size as the original one. • When you display a restored image on the camera’s monitor screen, the date and time indicate when the image was originally recorded, not when the image was corrected. NOTE • If you want to record the image of an old photograph with this camera and restore the resulting image, see “Restoring an Old Photograph” on page 109. EDITING IMAGES 163 Editing the Date and Time of an Image Editing the Date and Time of an Image Use the procedure in this section to change the date and time of a previously recorded image. 1. In the PLAY mode, use [..] and [..] to display the image whose date and time you want to edit. 2. Press [MENU]. 3. On the “PLAY” tab, select “Date/Time” and then press [..]. 4. Set the date and the time you want. 5. When all the settings are the way you want, press [SET] to apply them. • After editing the time and date, display the image to confirm that the date and time are correct. IMPORTANT! • The date and time stamped into an image using the Time Stamp feature cannot be edited (page 135). • You cannot edit the date and time of an image that is protected. Unprotect the image and then edit the date and time. • You can specify any date in the range of January 1, 1980 to December 31, 2049. To do this: Do this: Change the value at the cursor location Press [..] or [..]. Move the cursor between settings Press [..] or [..]. Toggle between 12-hour and 24hour timekeeping Press [BS]. EDITING IMAGES 164 Rotating an Image Rotating an Image Perform the following procedure to rotate the image (snapshot or movie) currently on the monitor screen. This feature comes in handy with a snapshot that you shot using portrait (vertical) orientation. After rotating a snapshot, you can return it to its original orientation, if you want. • Note that this procedure does not actually change the image data. It simply alters how the snapshot is displayed on the camera’s monitor screen. 1. In the PLAY mode, press [MENU]. 2. On the “PLAY” tab, select “Rotation” and then press [..]. • This operation can be performed only while a snapshot or movie image is on the monitor screen. 3. Use [..] and [..] to select the snapshot whose display image you want to rotate. 4. Use [..] and [..] to select “Rotate” and then press [SET]. • Each press of [SET] will rotate the displayed image 90 degrees left. 5. When the displayed image is at the orientation you want, press [MENU]. IMPORTANT! • You cannot rotate an image that is protected. To rotate a protected snapshot, first remove its protection (page 181). • Zoomed images cannot be rotated. • The original (unrotated) version of a snapshot’s image will be displayed on the 12-image screen and the calendar screen. • Movies can be rotated on the camera’s monitor screen only. The movie is not rotated when played on a computer screen. EDITING IMAGES 165 Combining Multiple Snapshots into a Single Image (Layout Print) Combining Multiple Snapshots into a Single Image (Layout Print) You can use the following procedure to insert snapshots into the frames of a layout and produce a new image that contains multiple snapshots. • Layout pattern (Two • Layout pattern (Three Images) Images) 1. In the PLAY mode, use [..] and [..] to select the first snapshot you want to include in the layout. 2. Press [MENU]. 3. On the “PLAY” tab, select “Layout Print”, and then press [..]. • This operation can be performed only while a snapshot is on the monitor screen. 4. Use [..] and [..] to select the type of layout you want and then press [SET]. 5. Use [..] and [..] to select a background color. 6. Press [SET]. EDITING IMAGES 166 7. Use [..] and [..] to select the snapshot for the layout and then press [SET]. 8. Repeat steps 6 and 7 for all of the other frames in the lay...