Оценок - 3, средний балл: 3.3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
To Cancel the On Timer E-18 To select an operating mode in advance, press the button until the desired mode is displayed at the top of the remote control. Result: The air conditioner will run in the selected mode when it is turned on. 3 Setting the Off Timer The Off Timer enables you to switch off the air conditioner automatically after a given period of time. You can set the period of time from 30 minutes to 24 hours. To set the operating time, press the button one or more times until the required time is displayed. Possible time is between 0.5 hour and 24 hours inclusive. 1 You can see or change the setting mode and/or the temperature by pressing the button or the button after setting the Off timer. Notte Press the (Set/Cancel) button to complete the setting. Result: The remaining time is displayed. Blinking of the timer indicator stops. The air conditioner will switch off automatically when the counter displayed on the remote control reaches the set time and disappears the Off timer setting. 2 If you would like to turn the air conditioner on after 2 hours and to operate it for 2 hours: 1. Press the button until ‘2.0 Hr’ is displayed. 2. Press the (Set/Cancel) button. 3. Press the button until ‘4.0 Hr’ is displayed. 4. Press the (Set/Cancel) button. Examplle If you press the button when the On Timer is set, the On Timer is also cancelled. Notte Press the (Set/Cancel) button. To Cancel the Off Timer E-19 ENGLISH Setting the Sleep Timer The Sleep Timer can be used when you are cooling your room to switch the air conditioner off automatically after a period of 6 hours. Notte If you wish to switch the unit off at a specific time, refer to page 19. 1 Make sure that you have selected the COOL mode. 2 Press the button. Result: The indoor unit beeps. The air conditioner will be controlled as indicated in the illustrations below. Cooling The desired temperature is increased by 1°C every hour. When it has been increased by 2°C (after 2 hours), the temperature is maintained for four hours. To Cancel the Sleep Timer If you no longer wish to use the Sleep Timer that you have set, you can cancel it at any time. Press the button. Result: The indoor unit beeps. The is no longer displayed. The air conditioner operates normally. E-20 Operating Recommendation Here is a recommendation that you should follow when using your air conditioner. Topic Recommendation Power failure If a power failure occurs when the air conditioner is operating, the unit is switched off. When the power returns, the air conditioner starts up again automatically. E-21 ENGLISH Temperature and Humidity Ranges The following table indicates the temperature and humidity ranges within which the air conditioner can be used. If the air conditioner is used at... Then... High temperatures The automatic protection feature may be triggered and the air conditioner stopped. Mode Outdoor Temperature Indoor Temperature Indoor Humidity Cooling 21°C to 43°C approx. 18°C to 32°C approx. 80% or less Drying 18°C to 43°C approx. 18°C to 32°C approx. - . If the cooling operation is used at over 33°C(indoor temperature), it does not cool at its full capacity. Low temperatures A water leak or some other malfunction may occur if the heat exchanger freezes. High humidity levels Water may condense on and drip from the surface of the indoor unit if it is used for long periods. E-22 Operating Your Air Conditioner Without the Remote Control Your air conditioner can be operated directly from the indoor unit if the remote control is lost or broken. 1 Slide the lower front grille down. 2 To switch the air conditioner on, press the On/Off switch on the right side of the indoor unit. Result: The Operation indicator on the indoor unit comes on. The indoor unit beeps. The air conditioner starts up in the most suitable mode for the room temperature: Room Temperature Operating Mode 21°C or above Cool 3 To switch the air conditioner off, press the On/Off switch again. NNNNooootttteeee Even if the air conditioner has been switched on via the On/Off switch, operations can still be controlled using the remote control as usual. Your air conditioner can be operated directly from the indoor unit if the remote control is lost or broken. 1 Slide the lower front grille down. 2 To switch the air conditioner on, press the On/Off switch on the right side of the indoor unit. Result: The Operation indicator on the indoor unit comes on. The indoor unit beeps. The air conditioner starts up in the most suitable mode for the room temperature: Room Temperature Operating Mode 21°C or above Cool 3 To switch the air conditioner off, press the On/Off switch again. NNNNooootttteeee Even if the air conditioner has been switched on via the On/Off switch, operations can still be controlled using the remote control as usual. Solving Common Problems Explanation/Solution Check that the breaker used for the air conditioner is switched on. Check that the operation indicator on the indoor unit is on; if ne...
Эта инструкция также подходит к моделям:Кондиционеры - AS18PJGE7/CBM (6.09 mb)
Кондиционеры - AS18PJGE7/FMC (6.09 mb)
Кондиционеры - AS24P6GED7/CBM (6.09 mb)
Кондиционеры - AS12P4GBD/SET (6.09 mb)