Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
and you attempt to copy a previously used 2HD Floppy Disk from the Floppy Disk Drive to the Digital Camera with the CopyDisk utility, please note the following. After PC start up, when CopyDisk is attempted the first time, a Windows error message box may be displayed and CopyDisk may fail. The tource and deslrtafon drtki a a not the tame type Mate sue ihe you choose ae the tome typ*, «and then by agem. 1 In this case, switch the source Floppy Disk and the target Floppy Disk so that CopyDisk is performed from the Digital Camera to the Floppy Disk Drive. By doing this, CopyDisk will function properly. 63 Special Features Using the SuperDisk Drive (Macintosh) Formatting the Disk Media • Do not format the Disk Media under DOS format with Macintosh. 1 Insert the SuperDisk Diskette or Floppy Disk into the Digital Camera slot. 2 Click the SuperDisk Diskette or Floppy Disk icon displayed on the desktop. 3 Select “Erase Disk” in the “Special” MENU. 4 Select format style. Then, click “Erase". |\vy~A Completety trait disk named \J—\\ "untitled Name: untitled I Mac OS Extended 12QJMB^ DOS 120.3M& r*_> *■■■—" * -* • When using the Disk Media that was formatted to Mac OS standard format or Mac OS expanded format in the Digital Camera, format again in the Digital Camera. • When "File Sharing" is used, formatting may be impossible. In this case, either quit "File Sharing" or turn AppleTalk off in the control panel. • In Camera mode (REC, MANUAL REC, PLAY), only PC Exchange Ver. 2.2.1 in DOS format can be used. 64 For assistance, call 1-800-272-7033. Using the SuperDisk Drive Important Operating Notes • FORMAT command cannot be used. The FORMAT command at the DOS prompt cannot be used for the Digital Camera. • DISKCOPY command cannot be used. The DISKCOPY command at the DOS prompt cannot be used for the Digital Camera. • You cannot boot your PC from this Digital Camera. • When using the Digital Camera, never remove the Disk Media while data is being written to it. If the Disk Media is removed while it is being written, it may become completely unusable. •When a Defective Disk is inserted into the Digital Camera, it will take a longer than usual time for the drive to recognize the disk. This is normal, so please wait for a while. • If the Disk Media is not inserted into the SuperDisk Drive, “FormatUtility for Super Disk” will not be displayed. Insert the Disk Media. After the busy light goes out, right click on the SuperDisk icon. •According to the use limitations of “QuickTime for Windows”, files stored in the SuperDisk Driver may not play back normally. • Unable to place in Suspend/ Resume mode. While the SuperDisk Driver is reading/writing to the Disk Media, please do not place in Suspend/ Resume mode. • This Digital Camera is not compatible with Flash Pass. • Using a head cleaner caution. When using a head cleaner, please use the product described below and limit cleaning to about 7 seconds. Name of article : Imation 3.5" Dry Head Cleaning Disk Article No. : 74040183035 65 Special Features Print Mark Use this feature when a laboratory service that supports DPOF (Digital Print Order Format) is used. —Before you begin- Set the POWER Switch to PLAY. (See pages 19-20.) 1 Stamp Print Marker 1 Press A or Y to select PRINT MARK and press ^ to display PRINT MARK menu. «PRINT MARK> CANCEL ALL INDEX SEL : SET EXIT : MENU • Select “SET/CANCEL PAGE” to select image, “CANCEL ALL” to cancel alt image print marks, and “INDEX” to set or clear index print on all pages. Press ^ or ^ to select the image page you want to mark for printing and press SHTR to stamp print mark. A “o" mark will appear on the image. Press A or ▼ to select number of copies to print, (up to 99) O 1