Оценок - 4, средний балл: 3.3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
The required tape length for the currently selected CD appears, followed by the total playing time and tracks for side A and side B. Note You cannot use this function after programming. In order to use this function, you must first erase the programme (see “To clear the entire programme” on page 25). DJ Effects DJ Effects Looping part of a CD Flashing part of a CD — Loop — Flash With the loop function, you can repeat part of With the flash function, you can “flash” the a CD during playback. This lets you create CD sound during playback. This lets you original recordings. create original recordings. a.¤ .0 ) POWER LOOP jog dial a.¤ .0 ) POWER jog dialFLASH /Press and hold LOOP during playback at the point you want to start the Loop function, and release to resume normal play. To adjust the loop length Turn the jog dial while holding LOOP (or press MUSIC MENU Bor bwhile holding LOOP on the remote) to select different loop lengths (LOOP 1~20). /Press and hold FLASH during playback at the point you want to start the Flash function, and release to resume normal play. To adjust the flash length Turn the jog dial while holding FLASH (or press MUSIC MENU Bor bwhile holding FLASH on the remote) to select different flash lengths (FLASH 1~20). To use LOOP and FLASH together Press and hold both LOOP and FLASH at the same time. Notes • The loop and flash length cannot be adjusted during this operation. Adjust the loop and flash lengths independently beforehand if necessary. • To record the flash effect, use the analog (VIDEO/ MD OUT) connections or this unit’s tape deck. Waving the equalizer — Wave With the Wave function, you can fluctuate the graphic equalizer automatically. This effect can be used with any source, but it cannot be recorded. a.¤ .0 ) POWER WAVE jog dial /Press and hold WAVE to start the Wave function, and release to resume normal listening. To adjust the wave length Turn the jog dial while holding WAVE to select a different wave length (WAVE 1~10). 30 Sound Adjustment Sound Adjustment Notes Adjusting the sound You can reinforce the bass, create a more powerful sound, and listen with headphones. a. a. . » a ¤ ¤ ¤ .0 ) a. .» a GROOVE POWER PHONES DBFB To reinforce bass (DBFB) Press DBFB*. Every time you press the button, the display changes as follows: DBFB nDBFB n display off • With some songs, the music will sound distorted when you use the DBFB system with the graphic equalizer if the bass is too strong. Adjust the bass slowly while listening to music so that you can monitor the effect of the adjustment. • Cancelling GROOVE sets DBFB to “DBFB ” and flattens the equalizer curve. To cancel the DBFB level, press DBFB until the indication disappears. Adjust the equalization to obtain the effect you desire. To listen through the headphones Connect the headphones to PHONES jack. No sound will come from the speakers. n “DBFB ” is more effective than “DBFB ” . * DBFB = Dynamic Bass Feedback For a powerful sound (GROOVE) Press GROOVE. The volume switches to power mode, DBFB is automatically set to full strength, the equalizer curve changes, and the “GROOVE” button lights up. Press GROOVE again to return to the previous volume. Selecting the surround menu The surround menu lets you select the sound characteristic according to the sound you are listening to. To make the most out of this feature, be sure to connect the supplied rear and centre speakers (see page 7). a. a. . » a ¤ ¤ .0 ) a. a POWER 4 $ 4$ )0 P += p a a» a» DSP MODE DSP LEVEL DSP /Press DSP repeatedly to select a DSP mode. OFF: Turns off the DSP mode. HALL: Reproduces the acoustics of a concert hall. THEATER: Reproduces the acoustics of a movie theater Tip You can also select the DSP mode by pressing DSP MODE on the remote repeatedly to choose the mode you desire. To adjust the “presence” of the surround effect Press DSP LEVEL on the remote repeatedly to choose the level you desire. Every time you press the button, the indication changes as follows: n DSP LEVEL 1nDSP LEVEL 2nDSP LEVEL3 Enjoying the Dolby Pro Logic Surround sound You can enjoy the Dolby Pro Logic Surround sound of videos that are Dolby Surround encoded (q). Complete the setup and adjustents first (see page 5). a. a. . » a ¤ ¤ ¤ .0 ) a. .» a POWER PRO LOGIC /Press PRO LOGIC while playing a programme source. To cancel the Dolby Pro Logic Surround sound Press PRO LOGIC again. Notes • You can’t use both the Dolby Pro Logic Surround sound and the surround menu function at the same time. • When recording the sound, be sure to turn of the Dolby Pro Logic Surround sound. Selecting the audio emphasis The audio emphasis menu lets you select the sound characteristic according to the sound you are listening to. The personal file function (see “Making a personal audio emphasis file”) lets you store your own effects. 1 2 3 a.¤ .0 ) POWER EFFECT ON/OFF 1 Press MUSIC, MOVIE, or GAME (or MUSIC MENU V/von the remote repeatedly) to select a menu. See the chart “Music menu options” below. The last effe...
Эта инструкция также подходит к моделям:Музыкальные центры - MHC-GR10AV (888.9 kb)