Инструкция по эксплуатации Brother, модель E-STUDIO 850

Производитель: Brother
Размер: 4.63 mb
Название файла:

Язык инструкции:

Перейти к скачиванию

Фрагмент инструкции

P.269) v Bypass tray (.. P.272) v External Large Capacity Feeder (optional) (.. P.272) v Finishing device (optional) (.. P.274) (including the Hole Punch Unit and Inserter Unit) v Inside of the equipment (.. P.282) 267 4.Jam Symbols (Cont.) Separation/Installation and moving of the options Perform the following procedure to separate, install and move the finishing device (including the Hole Punch Unit and Inserter Unit) and the External Large Capacity Feeder when clearing the jam. When installing the options, be careful not to let your fingers be caught between the equipment and the optional unit. Separating/Installing and moving the finishing device When separating the finishing device from the equipment: While placing your hand (position A) and pressing the button, gently move the finishing device away from the equipment. A When installing the finishing device to the equipment: While placing your hand (position A) and pressing the button, gently install the finishing device. 9A 268 9.BLINKING GRAPHIC SYMBOLS Separating/Installing and moving of the External Large Capacity Feeder When separating the External Large Capacity Feeder from the equipment: While pressing the button, gently separate the External Large Capacity Feeder. When installing the External Large Capacity Feeder to the equipment: While placing your hand (position A) and pressing the button, gently install the External Large Capacity Feeder. A Reversing Automatic Document Feeder 1 Press the button on the Reversing Automatic Document Feeder to open the upper cover. 9 269 270 9.BLINKING GRAPHIC SYMBOLS 4.Jam Symbols (Cont.) 9 4 Close the guide plate. 2 Rotate the knob to remove any misfed originals. 3 Open the guide plate to remove any misfed paper. 5 Open the original feeding tray and remove any misfed originals. 6 Open the large size original exit tray, and remove any misfed originals. 7 Close the large size original exit tray, the original feeding tray and close the upper cover of the Reversing Automatic Document Feeder. 8 Open the Reversing Automatic Document Feeder. 9 Release the lock to open the platen sheet. 10Remove any misfed originals in the reversing area. 9 11 Close the platen sheet and the Reversing Automatic Document Feeder. 271 4.Jam Symbols (Cont.) Bypass tray 1 Remove the paper from the bypass tray. External Large Capacity Feeder 9 1 While pressing the button, gently separate the External Large Capacity Feeder from the equipment. (See .. P.268 for cautionary points regarding separation/ installation and moving of the options.) 2 Turn the knob of the External Large Capacity Feeder to remove the paper. 272 9.BLINKING GRAPHIC SYMBOLS 3 Remove the paper from the bypass cover. 4 Open the drawer to remove the misfed paper. 5 Close the drawer and install the External Large Capacity Feeder to the equipment. (See .. P.268 for cautionary points regarding separation/ installation and moving of the options.) 9 273 4.Jam Symbols (Cont.) Finisher Procedure for releasing the paper misfeed in the Hole Punch Unit. If the Hole Punch Unit is not installed, this procedure is not necessary. Procedure for releasing the paper misfeed in the Inserter Unit. If the Inserter Unit is not installed, this procedure is not necessary. Procedure for releasing the paper misfeed in the saddle stitch unit. If the Saddle Stitch Finisher is not installed, this procedure is not necessary. 1 While pressing the button, separate the finishing device from the equipment. (See .. P.268 for cautionary points regarding separation/ installation and moving of the options.) 9 2 Open the cover of the Hole Punch Unit. 3 Rotate the knob to locate the triangle mark within the indicated area on the label. 274 9.BLINKING GRAPHIC SYMBOLS 4 Close the cover of the Hole Punch Unit. 5 Remove any misfed paper seen on the feeding area of the finishing device. 6 Pull the lever to open the jam access cover. 7 Remove the paper. 9 275 4.Jam Symbols (Cont.) 8 Close the jam access cover. 9 Open the lower cover. 10 Remove the paper. 9 11 Close the lower cover. 12 Open the paper feeding tray to remove the paper. 276 9.BLINKING GRAPHIC SYMBOLS 277 9 13Open the upper cover of the Finisher or Saddle Stitch Finisher. 14Pull the knob 1 to open the buffer roller cover, and then remove the paper. 15Pull the knob up in the rear side of the Finisher to open the guide. 16Remove the paper, then close the guide. 4.Jam Symbols (Cont.) 17Pull the knob 2 up to open the buffer roller. 18Remove the paper from the lower area. 19Remove the paper from the paper exit side of the Finisher or Saddle Stitch Finisher. 9 20Close the buffer roller, buffer roller cover and upper cover of the Finisher or Saddle Stitch Finisher. 21 Return the paper feed tray of the Inserter Unit to its original position. 278 9...