It will accept BEA’s 4 .” Square Pushplate, 4 .” Square Pushplate, 4 .” Panther Pushplate, Dual Vestibule Pushplate and 4 .” Round Pushplate. The post is made of durable carbon steel and the mounting bracket is made of stainless steel for strength. It can be mounted on either existing concrete or newly poured concrete. CAP MOUNTING SCREWS (3) POST MOUNTING SCREWS (4) PLASTIC CAP TRANSMITTER MOUNTING TRAY (HIDDEN) NOT USED WITH PANTHER APPLICATION PUSHPLATE MOUNTING BOX (HIDDEN) PUSHPLATE (NOT IN

It is made of durable 304 stainless steel to match BEA’s 6” round pushplate. It can be surface-mounted directly to a wall, or attached to a single-gang, double-gang or 4X4 electrical box. 1. Fasten Escutcheon to wall surface. 2. Route wiring to pushplate switch through the appropriate hole (F). 3. Attach pushplate to Escutcheon. KEY QTY SCREW TYPE USE A 4 #12 X 1 7/16” Plastic Anchor Wall B 4 6-32 X 1/2” Machine Screw Single-Gang C Double-Gang D 4 8-32 X 3/4” Machine Screw 4 X 4 Box E * 6-32 X 1

These boxes are made of durable ABS plastic and are made to securely mount a pushplate and a variety of optional transmitters to activate an automatic door. Many of the boxes have an optional weather ring to give even more weather protection to the switch. They are also designed to attractively recess the pushplate in the housing to and to minimize vandalism from prying up the pushplate. PRODUCT DESCRIPTION COMPONENT ID PUSHPLATE SIZE PUSHPLATE SERIES SURFACE MOUNT BOX FLUSH MOUNT BOX WEATHE

FOR FURTHER ASSISTANCE DURING EASTERN STANDARD TIME AT 1-800-523-2462 FROM 8AM - 5PM. FOR AFTER-HOURS, CALL EAST COAST: 1-866-836-1863 OR 1-800-407-4545 / MID-WEST: 1-888-308-8843 / WEST COAST: 1-888-419-2564. DO NOT LEAVE ANY PROBLEM UNRESOLVED. IF YOU MUST WAIT FOR THE FOLLOWING WORKDAY TO CALL B.E.A., LEAVE THE DOOR INOPERABLE UNTIL SATISFACTORY REPAIRS CAN BE MADE. NEVER SACRIFICE THE SAFE OPERATION OF THE AUTOMATIC DOOR OR GATE FOR AN INCOMPLETE SOLUTION.WEB: WWW.BEASENSORS.COM E3EA PNIWM

Remove the battery cover on the chime. 2. Remove the white Styrofoam block 3. Unplug the red and black wires inside the battery compartment. 4. Remove the battery pack and discard appropriately. StyrofoamBlock House Code Door Try-Me Wires Chime components Required Tools: Small flat blade screwdriver, drill, 1/16” and 5/32” drill bits, and phillips screwdriver. Included Hardware: (2) Plastic screw anchors (2) 4x20mm screws (2) 3x20mm screws (2) Double sided adhesive pads The wireless door chime K

These boxes are made of durable ABS plastic and are made to securely mount a pushplate and a variety of optional transmitters to activate an automatic door. Many of the boxes have an optional weather ring to give even more weather protection to the switch. They are also designed to attractively recess the pushplate in the housing to and to minimize vandalism from prying up the pushplate. PRODUCT DESCRIPTION COMPONENT ID PUSHPLATE SIZE PUSHPLATE SERIES SURFACE MOUNT BOX FLUSH MOUNT BOX WEATHE

These boxes are made of durable ABS plastic and are made to securely mount a pushplate and a variety of optional transmitters to activate an automatic door. Many of the boxes have an optional weather ring to give even more weather protection to the switch. They are also designed to attractively recess the pushplate in the housing to and to minimize vandalism from prying up the pushplate. PRODUCT DESCRIPTION COMPONENT ID PUSHPLATE SIZE PUSHPLATE SERIES SURFACE MOUNT BOX FLUSH MOUNT BOX WEATHE

^ Input 1 and Input 2 are activation inputs for Door 3 and Door 4 respectively Input 3 is the door position switch for Input 1 (Door 3).Input 4 is the door position switch for input 2 (Door 4) if used. \Switch is closed when door is closed. MC-LINX2 # 2 0® POWER OUTPUT OPTION SETUf» □ □ 12 to 24 VAC/VDC +/- 10% , (SEE NOTE #1) DOOR 1 DOOR 2 DOOR 3 DOOR 4 V DPS DPS DPS DPS POWER OUTPUT OPTION SETU£ □ □ Output A directly to Activation Circuit of Door Control #1. Output B directly to .A

The faceplates are made of 1/16” thick stainless steel for durable use. 1. Determine the mounting location of the pushplate. Use the enclosed mounting template if the pushplate is to be attached directly to the door jamb, otherwise, the pushplate will mount directly into a jamb-style box with a 3 %” hole spacing. 2. If the pushplate is to be mounted directly to the jamb tube, use the template and mark the drill locations by tapping the holes with a hammer and center punch. Then proceed to dril