Оценок - 6, средний балл: 4
(
)
)
|
Фрагмент инструкции
The re-keying steps are the same as for the Schlage B-300 series deadbolt. Cylinder removal and replacement instructions are illustrated on the back page. A supplemental kit has been designed with replacement parts for the Keypad Locks and Deadbolts. Supplemental Re-Keying Kit Part Number 38-030 Keypad Re-Keying Kit Part Number Description Kit Qty. Reorder Qty. F605-367 CYLINDER DRIVER BAR FOR KPL 10 100 B520-628 WASHER FOR KPD TAILPIECE 15 150 B520-607 SPACER FOR KPD TAILPIECE 15 150 B520-608 RETAINER FOR KPD TAILPIECE 25 250 F605-349 SCREW FOR ATTACHING OUTSIDE KPD ESCUTCHEON TO BASEPLATE 15 150 B520-606 CYLINDER DRIVER BAR FOR KPD 10 100 <ЗЗЕ5? BE365 Cylinder Removal Instructions 1 Remove Backplate from Outside Keypad Assembly ■l! Rekey Cylinder as Usual Ж Remove Cylinder from Thumbturn Ж Remove Retainer, Block and Disc from Cylinder Remove Cylinder Cap, Tailpiece, Pin, and Spring С ж Install Spring, Pin, Tailpiece, and Cylinder Cap ) NOTE: Tailpiece is available in the Schlage Supplemental Electronics Lock Rekeying Kit Install Disc, Block and Retainer 81 U Reinstall Cylinder as Shown NOTE: Make sure top of cylinder is pointing toward keypad. 9f Use BE365 Installation Sheet to Install Lock. # Ingersoll Rand Security Technologies © 2006 Ingersoll Rand Company Limited MR-1602...