SYMBOLS USD202-2 The followings show the symbols used for tool. V .......................volts n....................no load speed ° A ....................... amperes ....................Class II Construction Hz ..................... hertz .../min................revolutions or reciprocation per minute ................ alternating current ................number of blow FUNCTIONAL DESCRIPTION 002816 1 1. Switch trigger 002822 1. Reversing switch lever 1 A B ASSEMBLY CAUTION: • Always be sure that t

Switch action CAUTION: • Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the “OFF” position when released. To start the tool, simply pull the switch trigger. Tool speed is increased by increasing pressure on the switch trigger. Release the switch trigger to stop. Reversing switch action This tool has a reversing switch to change the direction of rotation. Press the upper side (FWD side) of the reversing switch for clockwise rotation or th

/ Camarillo, CA 93011 Visit our Web site at: Copyright No portion of this manual or any artwork contained herein may be reproduced in any 1997 by Harbor Freight Tools®. All rights reserved. shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353. Specifications ITEM # Minimum Roll Diameter Maximum Roll Length Maximum Thickness (Steel) Maximum Thickness (Brass) Maximum Thickness (Aluminum) Wire Forming Gr

• Even though the diameters of bolts are the same, the proper fastening torque will differ according to the torque coefficient, the class of bolt and the bolt length. 3. The manner of holding the tool or the material of driving position to be fastened will affect the torque. 4. Operating the tool at low speed will cause a reduction in the fastening torque. MAINTENANCE MAINTENANCE CAUTION: Always be sure that the tool is switched off and unplugged before attempting to perform inspection or mainte

All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353 Specifications Drill 0 550 RPM 3/8 inch keyless chuck Variable speed Switch Forward / Reverse Switch 6 torque settings . .... Batteries One 14.4 VDC battery provided, 1.3 amp-hour Charger 120 VAC (input), UL approved Save This Manual You will need

SERVICE Use of unauthorized parts or failure to follow Maintenance instructions may create a risk of 23. Tool service must be performed only by electric shock or injury. qualified repair personnel. Service or main- USE PROPER EXTENSION CORD: Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Ta

To start the tool, move the release button forward and squeeze the switch lever. Tool speed is increased by increasing pressure on the switch lever. Release the switch lever to stop. Electric brake This tool is equipped with an electric brake. If the tool consistently fails to quickly stop after switch trigger release, have tool serviced at a Makita service center. 1 002821 Reversing switch action This tool has a reversing switch to change the direction of rotation. Slide the reversing switch to

Remove the battery from the tool. 2. a) Take the battery to your nearest Makita Factory Service Center or b) Take the battery to your nearest Makita Authorized Service Center or Distributor that has been designated as a Makita battery recycling location. Call your nearest Makita Service Center or Distributor to determinethe locationthatprovidesMakitabatteryrecycling. SeeyourlocalYel llowPagesunder“Tools-Electric”. CAUTION: • These accessories or attachments are recommended for use with your Maki

6. Do not store the tool and Battery Cartridge in locations where the temperature may reach or exceed 50°C (122°F). 7. Do not incinerate the Battery Cartridge even if it is severely damaged or is completely worn out. The battery cartridge can explode in a fire. 8. Be careful not to drop, shake or strike battery. 9. Do not charge inside a box or container of any kind. The battery must be placed in a well ventilated area during charging. SAVE THESE INSTRUCTIONS FUNCTIONAL CAUTION: DESCRIPTION • Al