Оценок - 3, средний балл: 3.7 ( )

Производитель: Milwaukee Размер: 414.82 kb Название файла: Язык инструкции:

Removing and Replacing Quik-Lok ® Cords (Fig. 1) Cat. No. 6580-20, 6581-20,6702-20, 6703-20, 6706-20, 6707-20, 670820, 6791-20 MILWAUKEE's exclusive Quik-Lok ® Cords provide instant field replacement or substitution. Fig. 1 1. To remove the Quik-Lok ® Cord, turn the cord nut 1/4 turn to the left and pull it out. 2. To replace the Quik-Lok ® Cord, align the connector keyways and push the connector in as far as it will go. Turn the cord nut 1/4 turn to the right to lock. Installing Driving MechanismCat. No. 6706-20, 6707-20, 6708-20 Install the final driving mechanism according to the instructions included with the tool's attachment. Installing and Removing Bits (Fig. 2)TEKS Ramp-Off Locator Assembly The locator assembly must be removed when changing bit sizes. Fig. 2 Magnetic socket Locator Ramp-off sleeve 1. Unplug tool. To remove the locator assembly, turn the ramp-off sleeve while pulling it away from the tool. 2. Pull out the magnetic socket and replace it with a new socket. 3. Push the locator assembly onto the nose of the tool until it snaps into place. Installing and Removing Bits (Fig. 3)Drywall Ramp-Off Locator Assembly Fig. 3 Bit holder Insert bit Locator Ramp-off sleeve 1. Unplug tool. To remove the locator assembly, turn the ramp-off sleeve while pulling it away from the tool. 2. Push insert bit into bit holder until snaps into place. Push the bit holder into the nose of the tool until into place. 3. Push the locator assembly of the tool until it snaps 7 Installing and Removing Magnetic Sock- OPERATION ets on Adjustable Screwdrivers For Cat. Nos. 6580-20 & 6581-20 (Fig. 4) 2. To unlock the trigger, pull the trigger and 1. Unplug tool. release. The lock button will pop out. 2. To remove the magnetic socket, slide the locking sleeve forward and pull out the socket. WARNING To reduce the risk of injury, wear safety goggles or glasses withside shields. Unplug the toolbefore changing accessories ormaking adjustments.Using Forward/Reverse Switch (Fig. 6) Fig. 6 Forward 3. To install the magnetic socket, slide the locking sleeve forward and push in the socket until it is fully seated. Trigger Switch Adjusting Locator Assembly (Fig. 8) Reverse The locator assembly controls the tool'sFor Cat. No. 6780-20 (Fig. 5) 1. For forward (clockwise) rotation, push driving depth. These screwdrivers feature 1. Unplug tool. the forward/reverse switch to the left a locator assembly with one-handed depth position as shown. adjustment. Depth adjustments can be made 2. To remove the magnetic socket, slide easily and quickly by turning the locator with the locking sleeve forward and pull out 2. For reverse (counterclockwise) rotation, one hand. Detents inside the sleeve “lock” push the forward/reverse switch to the the socket. the selected depth. right position as shown. For the drywall ramp-off locator assembly, Although an interlock prevents reversing start with about 1/16" clearance between the the tool while the motor is running, allow head of the screw and ...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: