ACCESSOIRES FOURNIS l Apres le deballage, verifier que les pieces suivantes sont incluses. MITGELIEFERTES ZUBEHOR l Nach dem Auspacken uberprufen, ob die folgenden Teile vorhanden sind. MEDFOLJANDE TILLBEHOR l Kontrollera efter det apparaten packats upp att foljande delar finns med. ACCESSORI IN DOTAZIONE l Verificare che tutte le parti seguenti siano contenute nell’imballaggio dell’apparecchio. ACCESORIOS INCLUIDOS l Desembale el aparato y verificar que los siguientes accesorios estan en la caj

If you select AUX under step 2 above, names will be displayed in the following order when you press +. AUX AUX: VIDEO2 AUX: CABLE AUX: GAME AUX: SAT AUX: MD AUX: CD AUX: LD AUX: DVD If you select DIGITAL 1 or 2 under step 2 above, names will be displayed in the following order when you press +. DIGITAL 1 D1: DVD D1: LD D1: MD D1: CD D1: SAT Notes • “D1:” is displayed before the name when DIGITAL 1 has been selected, while “D2:” is displayed before the name when DIGITAL 2 has been selected. • Pre

This allows you to enjoy the full experience of digital systems such as DOLBY DIGITAL, DOLBY PRO LOGIC, or YAMAHA CINEMA DSP. Description of DSP Programs n When only the front speaker unit is connected No. Program name Features and applicable sources 1 VIRTUAL SURROUND (input source: Dolby Digital or Dolby Surround) For enjoying the virtual surround field created using Dolby Digital or Dolby Pro Logic when using a front speaker unit. 7 MONO MOVIE For old monaural movies. n When the front speaker

The delay time is that time difference between when the sound from the main channels can be heard and the surround sound can be heard. Setting a longer delay time makes the sound field feel larger, while setting a shorter delay time makes it feel smaller. 1Press MENU to display “Delay Time”. MENU 2Press + or – to adjust the delay time. – + y • Adjustable range – For Dolby Digital (except for 2 ch)/DTS input: 0 to 15 ms (factory setting: 5 ms) – For the other inputs: 15 to 30 ms (factory setting:

Once DTS audio finishes playback, the tindicator may blink, and while it blinks only DTS audio can be played back. Immediately after DTS audio finishes playback, if you want to play normal PCM audio, reset the Input mode to AUTO. — If the DTS signal is interrupted when you perform Search or Skip, the tindicator may blink. If this condition continues for over 30 seconds, the Input mode automatically changes from DTS to normal digital (PCM) and the tgoes out. • Using “* Input Mode” in the SET MENU

And the higher the quantized bit rate the finer the sound that can be reproduced. SILENT CINEMA SILENT CINEMA is an original Yamaha system that reproduces in a pair of headphones the acoustic personality of sound field programs based on multi- speakers. Headphone parameters have been set for each sound field so that natural stereoscopic sound can be expressed and enjoyed through headphones. S-Video Signal With S-video the video signal that was normally transmitted using a pin cable is separated

1 Vp-p/75 . S Video (Y/C) ......................... 1 Vp-p/0.286 Vp-p/75 . Componente (Y/PB, PR) ............... 1 Vp-p/0.7 Vp-p/75 . AV (RGB SCART) ................................................. 50 dB SEZIONE TUNER Gamma di sintonizzazione FM Modelli statunitensi e canadesi ...... da 87.5 a 107.9 MHz Altri modelli ................................... da 87.5 a 108.0 MHz Gamma di sintonizzazione AM Modelli per U.S.A., Canada e Corea .......................................................... da

About memory backup If you disconnect the power cord from the outlet, CinemaStation will memorize the settings listed to the right for about a week. Set them again if those settings are erased after a week. • Volume • Subwoofer, Center and Surround L/R Speakers output levels (See page 59.) • SET MENU options (See page 89.) • Sleep Timer settings (See page 79.) • Preset radio stations (See page 41.) • DSP Program settings Delay Time (See page 72.) Dolby Pro Logic II Music settings (See page 68.)

Esto le permitira utilizar el boton VIDEO 1, VIDEO 2, VCR o MD/CD-R para introducir un dispositivo conectado al jack OPTICAL IN (MD/CD-R se asigna en el ajuste predeterminado.) Normalmente se introduce una senal analogica al jack VIDEO 1, VIDEO 2, VCR o MD/CD-R IN, y al jack OPTICAL IN se introduce una senal digital. Sin embargo, ajustando el modo de entrada en AUTO la entrada sera detectada automaticamente y usted podra reproducir entonces en el dispositivo que usted quiera pulsando simplemente