Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
If you select AUX under step 2 above, names will be displayed in the following order when you press +. AUX AUX: VIDEO2 AUX: CABLE AUX: GAME AUX: SAT AUX: MD AUX: CD AUX: LD AUX: DVD If you select DIGITAL 1 or 2 under step 2 above, names will be displayed in the following order when you press +. DIGITAL 1 D1: DVD D1: LD D1: MD D1: CD D1: SAT Notes • “D1:” is displayed before the name when DIGITAL 1 has been selected, while “D2:” is displayed before the name when DIGITAL 2 has been selected. • Pressing – displays the names in reverse order. 4You can repeat steps 1 through 3 to give names to AUX, DIGITAL 1 and DIGITAL 2 input terminals. To cancel the menu functions, press MENU until the input display returns. Adjusting the Delay Time When the selected DSP program is DOLBY DIGITAL/ DOLBY PRO LOGIC or DOLBY DIGITAL ENHANCED/ DOLBY PRO LOGIC ENHANCED, it is possible to adjust the delay time. The delay time is that time difference between when the main channel sound can be heard and the surround sound can be heard. Although it is possible to set the delay time separately for Dolby Digital and Dolby Surround input, if the Dolby Digital (or Dolby Surround) delay time is adjusted, the level for Dolby Surround (or Dolby Digital) will also be raised or lowered accordingly. Setting a longer delay time makes the sound field feel larger, while setting a shorter delay time makes it feel smaller. 1Press MENU to display “Delay Time”. 2Press MENU + or – to adjust the delay time. y • Adjustable range – For Dolby Digital input: 0 to +15 ms – For Dolby Surround input: 15 to 30 ms To cancel the menu functions, press MENU until the input display returns. CAUTION The variable sound intensity range is large in the case of CDs and MDs. Listening for an extended period of time at or near maximum volume to music that includes sudden changes from soft to loud noises may damage the speakers. OPERATING OTHER COMPONENTS USING THE REMOTE CONTROL OPERATING OTHER COMPONENTS USING THE REMOTE CONTROL Notes • Remote control of some component may not be possible depending on the model and the year of make even though its manufacturer is listed on page i (at the end of this manual). • Depending on the model in question, some component from other manufacturers cannot be controlled, or only limited functions can be controlled, even though the proper manufacturer code has been set. If you encounter this problem, please use the remote control supplied with the component in question. • Setting the manufacture code can not be performed if your component to be controlled does not support remote control operation. Setting the Manufacturer Code n Using manual preset Transmission indicator 1 2 3 1Press the remote control selector button (TV, VCR or SAT) for which the manufacturer code is to be set. The signals for controlling the front speaker unit have already been set for the S70 button so that only the manufacturer code for the TV, VCR or SAT needs to be set. A manufacturer code can be set for a single button if necessary. 2Hold down SET and press cuntil the transmission indicator lights. The indicator will light. 3While the transmission indicator is lit, use the numeric buttons to enter the 4-digit manufacturer code for the component to be controlled. The indicator will go out. The transmission indicator will go out, the code has been set properly. (The code has not been set properly if the indicator flashes and then goes out.) Refer to page i at the end of this manual for a list of manufacturer codes. 4Press p and check that the component to be controlled turns on and off. 23 REMOTE CONTROL English OPERATING OTHER COMPONENTS USING THE REMOTE CONTROL OPERATING OTHER COMPONENTS USING THE REMOTE CONTROL Using auto preset 3Hold down SET and press cuntil the 2 transmission indicator lights. Transmission indicator The indicator will light. 4While the transmission indicator is lit, using 3,5 4 4 the numeric buttons, if you selected “TV” under step 2, enter “0001”; if you selected “VCR”, enter “0002”; and if you selected “SAT”, enter “0003” for satellite tuner or “0004” for cable TV. The indicator will go out. 5Hold down SET and press cuntil the transmission indicator lights. The indicator will light. 1Turn on the power of the component (TV, VCR or satellite tuner/cable TV) to be controlled by the remote control. 2Press the remote control selector button corresponding to the component for which auto preset is to be performed. (Press “TV” for TV, “VCR” for VCR, and “SAT” for satellite tuner/cable TV.) The signals for controlling the front speaker unit have already been set for the S70 button so that only the manufacturer code for the TV, VCR or SAT needs to be set. A manufacturer code can be set for a single button if necessary. OPERATING OTHER COMPONENTS USING THE REMOTE CONTROL OPERATING OTHER COMPONENTS USING THE REMOTE CONTROL Transmission indicator 7 6Point the remote control at the component to be controlled (the component turned on in step 1) and press p...