• Insert the screws into the holes. They should now poke out of the front of the door. • Line up the holes in the handle with the screws and give each screw about 2-4 full turns into the handle. • Now screw the screws in all the way, and your handle is installed! After you get the handle(s) installed, make sure that your wine cooler is fully unpacked, and position it into your preferred location (remember, for the best conditions for your wine, choose a spot in a cool (room temperature) area, aw

If food is placed inside, ensure that there is sufficient airflow between items. Also note that the temperature range for this cooler is optimized for wine and beverage storage. Perishable food items may require a different storage environment. • Do not place hot food or drinks into the wine cooler before they cool down to room temperature. • Please close the cooler door immediately after putting in or taking out wine in order to prevent inside temperature from dramatically changing. • Avoid sub

Parts and Features 1. LIGHT 2. FAN GRATE 3. SHELF 4. FOOT 5. HINGE 6.TEMPERATURE DISPLAY 7. TEMPERATURE CONTROLS 8. DOOR FRAME 9.DOOR GLASS 10.HANDLE Note: The above diagram is for reference only- your specific model of wine cooler will likely differ slightly from the diagram above (in light placement, bottle capacity, etc,) but its operation will be essentially the same. 3. Operation The Temperature Control Your wine cooler uses a digital control to adjust the thermostat- Adjust the temperature

Let any hot foods or drinks cool before placing them inside the cooler. 5. Troubleshooting Your EdgeStar wine cooler is a thermoelectric refrigeration unit that uses “green” thermoelectric cooling to store your wine under ideal conditions. What are the benefits of thermoelectric cooling? • Low energy usage • No vibration • Cools with little noise- the only noise produced is by the fans used to dissipate heat. What are some of its limitations? • Cooling takes longer than with equivalent compresso

Parts and Features 3 3. Operation 3 4. Troubleshooting 5 5. Limited Warranty 8 Thank you and Intro Thank you for purchasing this EdgeStar wine cooler. Once you get this unit set up, it will provide you and your family with years of great service. If you are reading this owner’s manual, you’ve probably already unpacked the unit. Note that you should save the packaging in case you need to safely transport this wine cooler in the future. In order to assemble this wine cooler, carefully unpack all p

On some models, the hinges can be reversed, to swing open from the right. To reverse the hinges, you need a flat head screwdriver and a Phillips head screwdriver. Please call service for further instructions about reversing the door swing. Note: dual door models do not feature reversible doors. Caution: If you do not feel comfortable reversing the hinges yourself, have a qualified person do it for you. Door Lock (not standard on all models) Some models of wine cooler have a factory installed loc

• An empty cooler can be dangerous for children. If disposing of the cooler remove gaskets, latches, lids and the entire door from your unused appliance, or take other action to ensure that children cannot become trapped inside. • If your model of wine cooler is equipped with a lock, take care to keep the keys away from children. • Do not cut or remove the third prong (the grounding prong) from the power cord. • The cord should be secured behind the unit and should not be left exposed or danglin

In addition to energy efficiency, and the previously-mentioned environmental-friendliness, thermoelectric cooling is very quiet, making it ideal for homes and offices. While thermoelectric cooling offers many benefits, the cooling performance of thermoelectric units tends to strongly correlate to the environment in which the units are located. In other words- the cooler the environment, the better the cooling perfromance of the wine cooler. In light of the above, it is helpful to note that thi

Make sure the door gasket is properly sealing. Make sure the cooler has at least 2” on the sides and 4” in the back for clearance. The cooler makes too much noise. If the noise is from the fan, it may be normal operating noise. The unit is not level. Popping or crackling noises are coming from the unit. The fan makes normal fan noises when operating- this is normal. Make sure the cooler is on a level surface. Some popping or crackling noises are normal. They are caused by expansion and contracti

Screw them in tighter to make them shorter. Note: This cooler is not designed to operate with the levelling legs removed. Handle Some models of wine cooler are shipped with a towel bar-style handle. To install the handle, you will need a Phillips head screwdriver. Look at the left side of the door frame, facing outwards. There are two small holes in the frame. Take the handle and hold it up to the door frame so that the holes in the handle line up with the holes in the door frame. While holding