Войти:
Оценок - 4, средний балл: 5 ( )

Инструкция по эксплуатации EdgeStar, модель TWR80ES

Производитель: EdgeStar
Размер: 70.45 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


On some models, the hinges can be reversed, to swing open from the right. To reverse the hinges, you need a flat head screwdriver and a Phillips head screwdriver. Please call service for further instructions about reversing the door swing. Note: dual door models do not feature reversible doors. Caution: If you do not feel comfortable reversing the hinges yourself, have a qualified person do it for you. Door Lock (not standard on all models) Some models of wine cooler have a factory installed lock with keys. The lock is inset into the door. To lock your cooler, insert the key into the lock and turn the key clockwise until the metal tab is fully extended. To unlock your cooler, insert the key into the lock and turn counter clockwise until the metal tab is fully retracted back into the door. Caution: Make sure to keep the key in a safe place and out of reach of children- to prevent child entrapment. Cleaning the Cooler • Turn the temperature control to “off” and unplug your cooler. Remove all items from it (wine bottles, shelves, etc.) • Wash the inside surfaces with a mild cleaner. We suggest you use either warm water alone, or a baking soda solution (try mixing 2 tablespoons of baking soda into a quart of water.) • Wash the wire shelves/trays (if you have them) with a mild detergent solution. • Clean the wooden shelves/trays (if you have them) with a soft cloth and some wood cleaner. • Wash the outside of the cooler with a mild detergent solution. • Dry any wet parts with a soft cloth. Caution: make sure to minimize the exposure of water to any electronic or control parts. Extended Periods of Disuse Your cooler can operate safely for three weeks or longer without any adjustments. However, if the cooler is going to be left alone for several months, you should unplug it and clean it according to the instructions above. Pay special attention to drying the interior. Now set the unit aside somewhere safe. You may want to crack the door slightly to prevent mold growth or odor. Transporting the Cooler The ideal packaging for you cooler is its original packaging. If possible, keep this packaging handy and repack the cooler as it was initially packed if you need to transport it. If you do not have the original packaging: • Make sure the cooler is turned off and unplugged. • Remove all items. • Tape down the shelves and any other loose items within the cooler. • Shut the door and tape it closed. • Transport the cooler in a secure, upright position. • Protect the outside of the cooler with Styrofoam, cardboard, a blanket, etc. Energy Efficiency Tips Locate your cooler in the coolest area of the room. Locate your cooler away from direct sunlight or any heat-producing sources. Let any hot foods or drinks cool before placing them inside the cooler. 5. Troubleshooting Symptoms Possible causes Solutions The wine cooler does not turn on. There is a power failure. The cooler is not plugged in. A house fuse has blown or the circuit breaker is tripped. Ensure the cooler is plugged in and the power outlet has power. Replace the broken fuse in your fuse box or reset the breaker. The wine cooler will not reach the desired temperature The cooler is placed too close to a heat source. The cooler does not have sufficient ventilation. Keep the cooler away from sunshine or other heat sources. Make sure the wine cooler has several inches of ventilation on the sides and back. Close the door tightly and do not open the door too frequently or for a long period of time. Frost is forming in the wine cooler The door is opened too frequently or for a long period of time. The environment is humid. The ambient temperature is too low. The door is being opened too frequently. Though the unit uses an “auto-defrost” system, under certain conditions, manual defrosting may be required. If frost builds up, you can try running the cooler on a warmer temperature setting, minimizing the number of times you open the door, or unplugging the unit to allow the frost to melt. Symptoms Possible causes Solutions The cooler turns on and off frequently. The room temperature is higher than the recommended ambient temperature (77°F). The door is being opened often. The door is not completely closed. The door gasket is not sealing properly. The cooler does not have the suggested ventilation. Run the cooler in the appropriate ambient temperature. Minimize the number of times the door is opened. Make sure the door is completely closed. Make sure the door gasket is properly sealing. Make sure the cooler has at least 2” on the sides and 4” in the back for clearance. The cooler makes too much noise. If the noise is from the fan, it may be normal operating noise. The unit is not level. Popping or crackling noises are coming from the unit. The fan makes normal fan noises when operating- this is normal. Make sure the cooler is on a level surface. Some popping or crackling noises are normal. They are caused by expansion and contraction of the inside walls due to temperature ch...

Эта инструкция также подходит к моделям:
Диспенсеры - TWR121ES (70.45 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории