Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
• Insert the screws into the holes. They should now poke out of the front of the door. • Line up the holes in the handle with the screws and give each screw about 2-4 full turns into the handle. • Now screw the screws in all the way, and your handle is installed! After you get the handle(s) installed, make sure that your wine cooler is fully unpacked, and position it into your preferred location (remember, for the best conditions for your wine, choose a spot in a cool (room temperature) area, away from direct sunlight leaving about 2-4 inches around all sides, specifically the back for adequate ventilation. Make sure the unit is set on a sturdy surface that can support its weight. Note: that you can screw in and out the legs to level the unit. You may also want to clean the interior with a solution of mild soap and water and a damp cloth. Then plug the unit in, set the temperature, and fill it with wine. At what temperatures should you set the wine cooler? Experts differ in opinion, but we recommend low to mid 50’s (F) for whites and mid 60’s (F) for reds. Enjoy! IMPORTANT SAFEGUARDS When using an electrical appliance, basic precautions should always be followed, including the following: BEFORE USE, PLEASE READ AND FOLLOW ALL INSTRUCTIONS FOR THIS WINE COOLER • Do not use if the power supply cord is damaged. If damaged, it must be replaced by the manufacturer or a similarly qualified technician. • This wine cooler is not intended for use by young children or infirm persons without supervision. • Ensure the cooler is unplugged before cleaning or if not in use. • To clean the cooler use only mild detergents or glass cleaning products. Never use harsh detergents or solvents. • It is not recommended to use this wine cooler with an extension cord or power strip. Please ensure that the appliance is plugged directly into an electrical outlet. • When positioning the wine cooler, ensure that there is at least a 2” clearance on each side with 4” directly behind the cooler. This will ensure adequate ventilation of heat from the back of the cooler. • This cooler is designed to store wine bottles. If food is placed inside, ensure that there is sufficient airflow between items. Also note that the temperature range for this cooler is optimized for wine and beverage storage. Perishable food items may require a different storage environment. • Do not place hot food or drinks into the wine cooler before they cool down to room temperature. • Please close the cooler door immediately after putting in or taking out wine in order to prevent inside temperature from dramatically changing. • Avoid subjecting the cooler to external heat sources or direct sunlight. • For a stable installation, make sure the cooler is placed on a flat, level, and solid surface. • Make sure that the surface on which the wine cooler is placed is strong enough to hold the wine cooler once it is fully loaded with wine bottles. • Do not place any other appliances on top of the wine cooler. • The wine cooler is an electrical appliance. To avoid injury or death from electrical shock, do not operate the wine cooler with wet hands, while standing on a wet surface, or while standing in water. • Do not use outdoors or in wet /moist conditions. • Do not turn the cooler upside down, on its side, or 45° or more off level. • Never pull the power cord to disconnect it from the outlet. Grasp the plug and pull it from the outlet. • Never lift or carry the wine cooler by the power cord. • Keep the power cord away from heated surfaces. • This wine cooler is designed for household, non-commercial use only. • Do not plug this cooler into the power socket before set up is completed. • An empty cooler can be dangerous for children. If disposing of the cooler remove gaskets, latches, lids and the entire door from your unused appliance, or take other action to ensure that children cannot become trapped inside. • If your model of wine cooler is equipped with a lock, take care to keep the keys away from children. • Do not cut or remove the third prong (the grounding prong) from the power cord. • The cord should be secured behind the unit and should not be left exposed or dangling. • Do not move this cooler without emptying it of its contents and securing the door in a closed position. 1. Specifications Model TWR210EBL Voltage/frequency 115V/60Hz Power 140 W (77) Rated Current 2.0 A (77) Net Weight 46.297LB Protection Type I Climate Type SN • N Model TWR215ESS Voltage/frequency 115V/60Hz Power 140 W (77) Rated Current 2.0 A (77) Net Weight 46.297LB Protection Type I Climate Type SN • N Model TWR320EBL Voltage/frequency 115V/60Hz Power 210 W (77) Rated Current 3.0 A (77) Net Weight 69.887LB Protection Type I Climate Type SN • N Model TWR325ESS Voltage/frequency 115V/60Hz Power 210 W (77) Rated Current 3.0 A (77) Net Weight 69.887LB Protection Type I Climate Type SN • N 2. Parts and Features 1. LIGHT 2. FAN GRATE 3. SHELF 4. FOOT 5. HINGE 6.TEMPERATURE DISPLAY 7. TEMPERATURE CONTROL...
Эта инструкция также подходит к моделям:Диспенсеры - Wine Cooler TWR215ESS (72.14 kb)
Диспенсеры - Wine Cooler TWR320EBL (72.14 kb)