Оценок - 5, средний балл: 4
(
)
)
|
Фрагмент инструкции
In the Calendar Mode, hold down BBBBB for about two seconds, until “ADJ” and then the year digits flash on the display. Keep BBBBB depressed until the year digits flash. 2. While any setting is selected (flashing), press CCCCC to increase it. Holding down CCCCCchanges the flashing setting at high speed. 3. Press BBBBB to move the selection around the display in the above sequence. •The day of the week is automatically set in accordance with the date. •The date can be set with the range of January 1,1995 to December 31, 2039. •If you do not operate any button for a few minutes while a selection is flashing, the flashing stops and the watch goes back to the Calendar Mode automatically. Timekeeping Mode The minutes hand advances 1/3 of a minute each time the seconds count in the digital display reaches 00, 20 and 40 seconds. To set the digital time Seconds 12/24 Hour Minutes 1. In the Timekeeping Mode, hold down BBBBB for about two seconds, until “ADJ” and then the seconds digits flash on the display. Keep BBBBB depressed until the seconds digits flash. 2. While the seconds digits are selected (flashing), press CCCCC to reset the seconds to 00. If you press CCCCC while the seconds count is in the range of 30 to 59, the seconds are reset to 00 and 1 is added to the minutes. If the seconds count is in the range of 00 to 29, the minutes count is unchanged. 3. Press BBBBB to move the selection around the display in the above sequence. 4. While hour or minutes are selected (flashing), press CCCCC to increase the setting. Holding down CCCCC changes the current setting at high speed. While the 12/24-hour setting is selected, press CCCCC to switch between the two formats. •If you do not operate any button for a few minutes while a selection is flashing, the flashing stops and the watch goes back to the Timekeeping Mode automatically. Hand setting Each press of AAAAAadvances the hands 20 seconds. Holding down AAAAAadvances the hands at high speed. •Note that the hands can be advanced only and cannot be moved back. Take care so you do not go past the setting you want to make. About the Backlight In any mode (except when making any settings), press LLLLL to illuminate the digital display for about two seconds. •The backlight of the watch employs an electro-luminescent (EL) light, which loses illuminating power after very long use. •The illumination provided by the backlight may be hard to see when viewed under direct sunlight. •The watch will emit an audible sound whenever the display is illuminated. It does not indicate malfunction of the watch. •The backlight automatically stops illuminating whenever an alarm sounds. •Frequent use of the backlight shortens battery life. Alarm Mode Hour Minutes When an alarm is turned on, an alarm tone sounds for 20 seconds at the preset time each day. To set the alarm time 1. In the Alarm Mode, hold down BBBBB for about two seconds, until “ADJ” and then the hour digits flash on the display. Keep BBBBB depressed until the hour digits flash. 2. Press CCCCC to increase the setting. Holding down CCCCC changes the current setting at high speed. 3. Press BBBBB to change the selection in the above sequence. •The format (12-hour and 24-hour) of the alarm time matches the format you select for normal timekeeping. •When setting the alarm time using the 12-hour format, take care to set the time correctly as morning or afternoon. •If you do not operate any button for a few minutes while a selection is flashing, the flashing stops and the watch goes back to the Alarm Mode automatically. •The alarm is turned on automatically whenever you change the alarm time setting. To stop the alarm Press any button to stop the alarm after it starts to sound. To switch the daily alarm on and off In the Alarm Mode, press BBBBB to turn the daily alarm on and off. ON Press B. OFF To test the alarm Hold down CCCCC while in the any mode to sound the alarm. Stopwatch Mode The Stopwatch Mode lets you measure elapsed time. The range of the stopwatch is 23 hours, 59 minutes 59 seconds. The measuring unit for the first hour of elapsed time measurement is 1/100-second. After that the unit is one second. You can use the EL backlight at any time while the stopwatch is operating by pressing LLLLL. 1. Press BBBBB to start the stopwatch. 2. Press BBBBB again to stop the stopwatch. •You can repeat steps 1 and 2 as many times as you want. 3. To reset the stopwatch time to all zeros, hold down BBBBB. General Guide •Press CCCCC to change from mode to mode. •In any mode (except when making any settings), press LLLLL to illuminate the digital display for about two seconds. Calendar Mode Timekeeping Mode Alarm Mode Stopwatch Mode Dual Time Mode Hold down BBBBB. Press BBBBB. Press BBBBB.Hour Mode indicator Minutes Month Day Day of week Hold down BBBBB. Press BBBBB. Press BBBBB.Press BBBBB. Hold down BBBBB. Press BBBBB. Press BBBBB. PM indicator Hour Minutes Seconds Press BBBBB.Press BBBBB. Mode indicator Minutes Seconds 1/100 seconds Af...