Оценок - 2, средний балл: 3
(
)
)
|
Фрагмент инструкции
All sample displays in this manual are shown using dark figures on a light background. • Button operations are indicated using the letters shown in the illustration. • Note that the product illustrations in this manual are intended for reference only, and so the actual product may appear somewhat different than depicted by an illustration. • Each section of this manual provides you with the information you need to perform operations in each mode. Further details and technical information can be found in the “Reference” section. Alarm Mode Countdown Timer Mode World Time Mode Stopwatch Mode General Guide • Press C to change from mode to mode. • In any mode (except a setting mode), press B to illuminate the display. Timekeeping Mode Press C. Timekeeping You can adjust the Home Time city date and time in the Timekeeping Mode. • The analog time of this watch is synchronized with the digital time. The analog time setting is adjusted automatically whenever you change the digital time. • If the analog time does not match the digital time for any reason, use the procedure described under “To adjust home positions” to match the analog setting to the digital setting. • Pressing D in the Timekeeping Mode toggles digital display between the Home City Date and Home City Time. D Home City Date Home City Time Month Day Seconds Day of week PM indicator Hour : Minutes Seconds Day of week To set the digital time and date 1. In the Timekeeping Mode, hold down A for about three seconds until the currently selected city code flashes in the upper digital display. This is the setting mode. 2. Use D (east) and B (west) to select the city code you want. • Make sure you select your Home City code before changing any other setting. • For full information on city codes, see the “City Code Table”. lllll lllllll l l Hour : Minutes City code PM indicator Seconds 3. Press C to change the flashing screen content in the sequence shown below to select the other setting. 12/24-Hour Seconds Format Hour Minutes DST Month Year City Code Illumination Day Duration 4. When the setting you want to change is flashing, use D or B to change it as described below. Change the city code Toggle the DST setting between Daylight Saving Time (on) and Standard Time (OFF). Use D (east) and B (west). Press D. Screen: To do this: Do this: 5. Press A to exit the setting mode. • The day of the week is displayed automatically in accordance with the date (year, month, and day) settings. Toggle between 12-hour (12H) and 24-hour (24H) timekeeping Reset the seconds to 00 Change the hour and minutes Change the year, month, or day Toggle the display illumination duration between 1.5 seconds (LT1) and three seconds (LT3) Press D. Press D. Use D (+) and B (–). Press D. Daylight Saving Time (DST) Daylight Saving Time (summer time) advances the time setting by one hour from Standard Time. Remember that not all countries or even local areas use Daylight Saving Time. To change the Daylight Saving Time (summer time) setting 1. In the Timekeeping Mode, hold down A for about three seconds until the currently selected city code flashes in the upper digital display. This is the setting mode. 2. Press C. This will display the DST setting screen. 3. Use D to toggle the DST setting on (on) and off (OFF). • The default DST setting is off (OFF). 4. When the setting you want is selected, press A to exit the setting mode. • The DST indicator appears to indicate that Daylight Saving Time is turned on. llllll lllll l l l lllllllllll DST indicator 12-hour and 24-hour timekeeping • With the 12-hour format, the PM indicator (P) appears for times in the range of noon to 11:59 p.m. and no indicator appears for times in the range of midnight to 11:59 a.m. • With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without the PM indicator (P). • The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is applied in all other modes. Stopwatch You can use the stopwatch to measure elapsed time, lap times and split times. If you specify a distance value, the stopwatch also will calculate and display speeds. • The digital display range of the stopwatch is 99 hours, 59 minutes, 59.999 seconds. The stopwatch continues to run until you stop it. If it reaches the above limit, it will restart the time measurement from zero. • The stopwatch operation continues even if you exit the Stopwatch Mode. If you exit the Stopwatch Mode while a stopwatch operation is in progress, the segments along the top of the upper digital display (upper display segments) will indicate the seconds of the current time. Each segment represents one second. This is to let you know that a stopwatch operation is in progress. • All of the operations in this section are performed in the Stopwatch Mode, which you enter by pressing C. Speed hand Upper display segments Important! • Check to make sure that the speed hand is not moving before you perform any Stopwatch Mode button operation. Specifying ...