Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
What to do if the bottom dial hand is stopped The watch is shipped from the factory with the bottom dial hand stopped in order to conserve battery power. Even though the bottom dial hand is stopped, the watch continues to maintain the current time internally. If the bottom dial hand is stopped when you purchase the watch, press any one of the watch’s buttons to start hand movement. 30 Bottom dial hand About This Manual • Button operations are indicated using the letters shown in the illustration. • Each section of this manual provides you with the information you need in order to perform operations in each mode. Further details and technical information can be found in the “Reference” section. • The bottom dial is a disk that rotates to indicate various types of information, depending on the mode. - During regular timekeeping, the thick line of the disk indicates the current second. In other modes, the thick line on the disk will indicate the day of the week, the alarm ON/OFF setting, and the DST ON/OFF setting. - When setting the date, the disk rotates so the arrow mark at the top of the dial points to the value that represents the ones digit of the current year setting. During a stopwatch operation, the dial rotates at one revolution per second. The 1/20-second count is the value indicated by the arrow mark at the top of the dial. General Guide 30 30 30 30 30 Alarm Mode Press C. Press C. Press A. Hold down A for about three seconds. World Time Mode Timekeeping Mode Stopwatch Mode Press B or D. Press D. (When the stopwatch is reset.) Time/Date Adjustment Press C. Timekeeping Use the Timekeeping Mode to set and view the current time and date, and to switch between Standard Time and Daylight Saving Time (summer time). • Daylight Saving Time (summer time) advances the time setting by one hour from Standard Time. Remember that not all countries or even local areas use Daylight Saving Time. • Pressing A in the Timekeeping Mode will cause the bottom dial hand to move to the current day of the week. Also, the indicator hand will move to the city code that is currently selected as your Home City. Press A to return to regular timekeeping. The watch also will return to regular timekeeping if you do not perform any operation for about three seconds. 30 30 30 Hour hand Indicator hand Minute hand Left dial hand Bottom dial hand Day City code Day of week Press A. To set the time and date 1. In the Timekeeping Mode, hold down A for about three seconds until the watch beeps. • The indicator hand will move to the city code that is currently selected as the Home City. This is the city code setting mode. • The bottom dial hand also will indicate the current DST on/off setting at this time. 2. Press D to move the indicator hand clockwise, until it points at the city code you want to select as your Home City. • For full information on city codes, see the “City Code Table”. 3. Press B to toggle the DST setting indicated by the bottom dial hand on or off. • Even after you change the DST setting, you still can use D to select a different Home City code if you want. 30 Indicator hand Bottom dial hand 4. After the Home City and DST settings are the way you want, press C. • This will cause the watch to beep and the indicator hand to move to the 12 o’clock position. This is the time setting mode. • All hands (except for the indicator hand and the bottom dial hand) and the day display will change automatically to the current time and date settings for the selected city code. • All button operations are disabled while the hands and day display are changing. 5. Use D (+) and B (–) to change the time (hour and minute) setting. • As you set the time, take care to ensure that the left dial hand also indicates the correct 24-hour timekeeping hour. 6. After the time setting is the way you want, press C. • This will cause the watch to beep and change to the year setting mode. 30 Hour hand Indicator hand Minute hand Left dial hand 7. Use D and B to change the year setting. • You can set the year within the range of 2001 to 2099. • Use B to move the indicator hand clockwise to the value of the tens digit that you want to specify. To set 2012, for example, move the hand to 10. • Use D to rotate the bottom dial so the ones digit you want to specify is at the top (under the mark). To set 2012, for example, rotate the dial until 2 is at the top as shown in the illustration. 8. After the year setting is the way you want, press C. • This will cause the watch to beep and change to the month setting mode. 30 00 10 20 90 30 40 70 60 50 80 2 1 0 9 8 6 7 5 3 4 Indicator hand Bottom dial hand Setting the year (10s digit) Setting the year (1s digit) 9. Use D to move the indicator hand clockwise to the month you want to specify. To set June, for example, move the hand to 6 (Jun). 10. After the month setting is the way you want, press C. • This will cause the watch to beep and change to the day setting mode. 11. Use D (+) and B (–) to change the day ...