Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
• See “Digital Time Daylight Saving Time (DST) Setting” for details about the DST setting. DST indicator On/Off status 4. Press A to exit the setting screen. • Resetting the seconds to 00 while the current count is in the range of 30 to 59 causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are reset to 00 without changing the minutes. • The year can be set in the range of 2000 to 2099. • The watch’s built-in full automatic calendar makes allowances for different month lengths and leap years. Once you set the date, there should be no reason to change it except after you have the watch’s battery replaced. • The day of the week is displayed automatically in accordance with the date (year, month, and day) settings. • A leading zero is added to dates from 1 through 9. Example: The 1st of the month is displayed as 01. Digital Time Daylight Saving Time (DST) Setting Daylight Saving Time (summer time) advances the digital time setting by one hour from Standard Time. Remember that not all countries or even local areas use Daylight Saving Time. To toggle the Timekeeping Mode digital time between DST and Standard Time 1. In the Timekeeping Mode, hold down A until the seconds start to flash, which indicates the setting screen. 2. Press C twice to display the DST setting screen. 3. Press D to toggle between Daylight Saving Time (ON) and Standard Time (OF). 4. Press A to exit the setting screen. • The DST indicator appears on the Timekeeping Mode, Alarm Mode and Edit Mode screens while Daylight Saving Time is turned on. DST indicator Current time in the zone of the selected city code Current seconds count City code World Time World Time shows the current time in 48 cities (29 time zones) around the world. • All of the operations in this section are performed in the World Time Mode, which you enter by pressing C. To view the time for another city code In the World Time Mode, press D to scroll eastwardly through city codes. • For full information about city codes, see the “City Code Table”. • If the current time shown for a city is wrong, check your Timekeeping Mode time and Home City code settings and make the necessary changes. 2 Operation Guide 5001 Alarm time (Hour : Minutes) Alarm number On/Off status Alarms You can set five independent Daily Alarms. When an alarm is turned on, the alarm tone sounds when the alarm time is reached. You can turn on an Hourly Time Signal that causes the watch to beep twice every hour on the hour. • There are six screens in the Alarm Mode. Five are for alarms (indicated by numbers from through ), and one is for the Hourly Time Signal (indicated by ). • All of the operations in this section are performed in the Alarm Mode, which you enter by pressing C. • You can select any one of three alarm beeper patterns. To set an alarm time 1. In the Alarm Mode, use D to scroll through the alarm screens until the one whose time you want to set is displayed. • To set an alarm, display one of the screens indicated by an alarm number from through . 2. After you select an alarm, hold down A until the hour setting of the alarm time starts to flash, which indicates the setting screen. • This operation turns on the alarm automatically. 3. Press C to move the flashing between the hour and minute settings. 4. While a setting is flashing, use D (+) and B (–) to change it. • When setting the alarm time using the 12-hour format, take care to set the time correctly as a.m. (no indicator) or p.m. (P indicator). 5. Press A to exit the setting screen. Alarm Operation The alarm sounds at the preset time for about 10 seconds, regardless of the mode the watch is in. • To stop the alarm tone after it starts to sound, press any button. To test the alarm In the Alarm Mode, hold down D to sound the alarm. • The alarm will sound using the currently selected beeper pattern. To turn an alarm on and off 1. In the Alarm Mode, use D to select an alarm. 2. Press A to toggle it on (ON displayed) and off (OF displayed). • Turning on an alarm ( through ) displays the alarm on indicator on its Alarm Mode screen. • In all modes besides the Alarm Mode, the alarm on indicator is shown for any alarm that is currently turned on. • The alarm on indicator flashes while the alarm is sounding. To turn the Hourly Time Signal on and off 1. In the Alarm Mode, use D to select the Hourly Time Signal ( ). 2. Press A to toggle it on (ON displayed) and off (OF displayed). • Turning on the Hourly Time Signal displays the Hourly Time Signal indicator on its Alarm Mode screen. • While the Hourly Time Signal is turned on, the Hourly Time Signal on indicator is shown on the display in all modes besides the Alarm Mode. On/Off status Alarm on indicator 1/100 second Minutes Seconds On/Off status Hourly time signal on indicator Stopwatch The stopwatch lets you measure elapsed time, split times, and two finishes. • The display range of the stopwatch is 59 minutes, 59.99 seconds. • The stopwatch continues to run, restarting from zero...