Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
To reference Help List. pause in autodial (Right Arrow) reduce the image size Also, lets you take numbers. automatically, select advantage of memory Volume AUTO. transmission. Moves the LCD cursor Speed Dial 13 to the left or right. Lets you dial 8 Makes a copy. Copy Tel-index Adjusts speaker, ring stored phone Lets you look up and handset volume. numbers by 9 numbers stored in the pressing a two- Stop dialing memory. 19 Liquid Crystal Display digit number. Stops a fax, cancels Displays messages to Function Dial Pad an operation or exits help you set up and Dials phone and fax from function mode. 14 Lets you access the operate your fax numbers, and can be machine. function and used as a keyboard programming mode. for entering information into the fax machine. 4 4 2 Location and Connections Caution 1 Never install telephone wiring during a lightning storm. 2 We recommend that this product be used with a surge protection device to protect the product against lightning storms. 3 Never install a telephone jack in a wet location unless the jack is specifically designed for a wet location. 4 Never touch telephone wires or terminals that are not insulated unless the telephone line has been disconnected at the network interface. 5 Use caution when installing or modifying telephone lines. 6 Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 7 Do not use the telephone to report a gas leak in the vicinity of the leak. 8 For PLUGGABLE EQUIPMENT, the socket-outlet should be installed near the equipment and should be easily accessible. Choosing a Location Place your fax machine on a flat, stable surface, such as a desk. Select a place that is free of vibration and shocks. Locate the fax machine near a telephone jack and a standard, grounded power outlet. Avoid placing your machine in a high-traffic area. Do not place near heaters, air conditioners, water, chemicals or refrigerators. Do not expose the fax machine to direct sunlight, excessive heat, moisture or dust. Do not connect your machine to electrical outlets controlled by wall switches or automatic timers. Disruption of power can wipe out information in the unit’s memory. Do not connect your machine to electrical outlets on the same circuit as large appliances or other equipment that might disrupt the power supply. Avoid interference sources, such as speakers or the base units of cordless phones. 55 LOCATION AND CONNECTIONS Load the Paper The paper cassette can hold about 100 sheets of 20-lb. paper. 1 Open the paper cover. 2 Place up to 100 sheets of paper in the paper holder. Do not allow the level of paper to pass maximum paper line on the paper guides. 3 Close the paper cover. Maximum Paper Line Paper Guides Acceptable Paper Size: Letter, Legal and A4 Weight: 17 lb. – 24 lb. Thickness: .0031 inches – .0039 inches 6 6 CHAPTER TWO Connections Connecting the Power Cord When you connect the power, the screen displays 01/01 00:00 FAX. NOTICE: 1) This fax must be grounded using a three-prong plug. 2) Since the fax machine is grounded through the power outlet, you can protect yourself from potentially hazardous electrical conditions on the telephone network by keeping the power to your machine on when you connect it to a telephone line. Similarly, you can protect yourself when you want to move your machine, by disconnecting the telephone line first, and then the power cord. 3) Lightning and power surges can damage this product! We recommend that you use a quality surge protection device on the AC power line as well as on the telephone line, or unplug the telephone line and electrical cords during a lightning storm. Connecting the Telephone Line Connect one end of the telephone line cord to the jack labeled LINE on the left side of the fax machine. Connect the other end to a modular wall jack. Special Line Considerations Roll Over Phone Lines A roll over phone system is a group of two or more separate telephone lines that pass incoming calls to each other if they are busy. The calls are usually passed down or “rolled over” to the next available phone line in a preset order. Your fax machine can work in a roll over system as long as it is the last number in the sequence, so the call cannot roll away. Do not put the fax machine on any of the other numbers; when the other lines are busy and a second fax call is received, the fax call is transferred to a line that does not have a fax machine. Your fax machine will work best on a dedicated line. LOCATION AND CONNECTIONS 7 Two-Line Phone System A two-line phone system is nothing more than two separate phone numbers on the same wall outlet. The two phone numbers can be on separate jacks (RJ11) or combined into one jack (RJ14). Your machine must be plugged into an RJ11 jack. RJ11 and RJ14 jacks may be equal in size and appearance and both may contain four wires (black, red, green, yellow). To test the type of jack, plug in a two-line phon...
Эта инструкция также подходит к моделям:Факсы - 770 (527.32 kb)