Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
- If you turn on the player and press the Play button with a disc already inserted,the TV will immediately turn on and switch to HDMI mode. English - 19 Connecting Depending on the manufacturer, the component terminals on your TV may be marked “R-Y, B-Y, Y” or “Cr, Cb, Y” instead of “PR, PB, Y”. The number and position of terminals may vary depending on the TV set. Please refer to the user's manual of your TV. NOTE Connecting to a TV (Component) - Connecting to your TV using Component video cables. - You will enjoy high quality and accurate color reproduction images. Component video separates the picture element into black and white(Y), blue(PB), red(PR) signals to present clear and clean images. (Audio signals are delivered through the audio output.) 1. Using component video cables (not included), connect the COMPONENT VIDEO OUT terminals on the rear of the Blu-ray disc player to the COMPONENT IN terminals of your TV. 2. Using the audio cables (not included), connect the AUDIO (red and white) OUT terminals on the rear of the Blu-ray disc player to the AUDIO (red and white) IN terminals of your TV. Turn on the Blu-ray disc player and TV. 3. Press the OUTPUT SELECT button on the front panel of the unit until the COMP indicator lights. Make sure the unit is in Stop mode. 4. Press the input selector on your TV remote control until the Component signal from the Blu-ray disc player appears on the TV screen. • If you have set the remote control to properly operate with your TV (pages 14~15), press the TV INPUT SEL. button on the remote control and select COMPONENT as the external source of the TV. LAN RED WHITE RED WHITE RED BLUE GREEN RED BLUE GREEN Audio Cable Component cable (not included) Connecting to a TV (S-Video) - Connecting to your TV using an S-Video cable. - You will enjoy high quality images. S-Video separates the picture element into black and white(Y) and color(C) signals to present clearer images than regular video input mode. (Audio signals are delivered through the audio output.) 1. Using an S-Video cable (not included), connect the S-VIDEO OUT terminal on the rear of the Blu-ray disc player to the S-VIDEO IN terminal of your TV. 2. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the Blu-ray disc player to the AUDIO (red and white) IN terminals of your TV. Turn on the Blu-ray disc player and TV. 3. Press the OUTPUT SELECT button on the front panel of the unit until the VIDEO indicator lights. Make sure the unit is in Stop mode. 4. Press the input selector on your TV remote control until the S-Video signal from the Blu-ray disc player appears on your TV screen. • If you have set the remote control to properly operate with your TV (pages 14~15), press the TV INPUT SEL. button on the remote control and select S-VIDEO as the external source of the TV. LAN RED WHITE RED WHITE Audio Cable S-Video Cable (not included) 20 - English Connecting Connecting to an Audio System (2 Channel Amplifier) 1. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the Blu-ray disc player to the AUDIO (red and white) IN terminals of your Amplifier. 2. Using the video signal cable(s), connect the HDMI OUT, COMPONENT, S-VIDEO, or VIDEO terminals on the rear of the Blu-ray disc player to the HDMI IN, COMPONENT, S-VIDEO, or VIDEO terminal of your TV as described on pages 17 to 20. 3.Turn on the Blu-ray disc player, TV and Amplifier. 4. Press the input select button of the Amplifier to select the external input in order to hear sound from the Blu-ray disc player. Refer to your Amplifier's user manual to set the Amplifier's audio input. LAN RED WHITE RED WHITE 2-Channel stereo amp Audio Cable Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. “DTS” and “DTS Digital Surround” are registered trademarks of DTS, Inc. Connecting to a TV(Video) 1. Using video/audio cables, connect the VIDEO (yellow)/AUDIO (red and white) OUT terminals on the rear of the Blu-ray disc player to the VIDEO (yellow) /AUDIO (red and white) IN terminals of your TV. 2. Turn on the Blu-ray disc player and TV. 3. Press the OUTPUT SELECT button on the front panel of the unit until the VIDEO indicator lights. Make sure the unit is in Stop mode. 4. Press the input selector on your TV remote control until the Video signal from the Blu-ray disc player appears on the TV screen. • If you have set the remote control to properly operate with your TV (pages 14~15), press the TV INPUT SEL. button on the remote control and select VIDEO as the external source of the TV. Noise may be generated if the audio cable placed too close to the power cable. If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 20~22) The number and position of terminals may vary depending on your TV set. Please refer to the user's manual of your TV. If there is one audio input terminal on the TV, connect it ...
Эта инструкция также подходит к моделям:Blu-Ray проигрыватели - AK68-01357B (7.06 mb)
Blu-Ray проигрыватели - 1357B-BD-P1200-XAC (7.06 mb)