Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
Con respecto a la instalacion y las conexiones, consulte el manual de Instalacion/ conexiones suministrado. Vi hanvisar till det medfoljande haftet angaende montering/anslutningar. Para a instalacao e as ligacoes, consulte o manual de instalacao/ligacoes fornecido. En ce qui concerne l’installation et les connexions, consulter le manuel d’installation/connexions fourni. Zur Installation und zum Anschlu. siehe die mitgelieferte Installations/ Anschlu.anleitung. Zie voor het monteren en aanaluiten van het apparaat de bijgeleverde [Montage/ Aansluitingen]-handleiding. Per l’installazione e i collegamenti, vedere il manuale di installazione/collegamenti in dotazione. XDP-210EQ . 1997 by Sony Corporation EN EN Welcome ! Thank you for purchasing the Sony Digital Equalizer Preamplifier. This unit is compatible with the Sony BUS system. This unit provides flexible equalization using 18-band (front) and 3-band (rear) equalizer with independent control of level and frequency. The characteristics, installation position, and sound field of the speakers make it possible to arrange the frequency response and reproduce the sound quality of the original performance. You can control this unit with a Sony Master unit which can operate a digital preamplifier. Table of Contents Getting Started Operating this unit .............................................. 3 About operation mode ....................................... 3 DSP Selecting the stored equalizer curve ................. 4 Setting and storing the equalizer curve ........... 4 Labeling an equalizer curve .............................. 5 Selecting the listening position ......................... 6 Adjusting the listening position ........................ 6 Adjusting the level of the subwoofer(s) ........... 7 Adjusting the cut-off frequency ........................ 7 Listening to each programmeme source in its registered equalizer curve ............................ 8 Registering an equalizer curve onto each disc .......................................................... 8 Additional Information Precautions ........................................................... 9 Specifications ..................................................... 10 Troubleshooting guide ..................................... 11 Getting Started Operating this unit You can control this unit by a Sony Master unit. Some master units have (+)/(–) (volume) buttons, and some have a dial. This instructions shows as follow. Rotate/press (+) or (–). Note There may be a difference between the display items of this manual and the master unit. Note in operation •The unit has a digital volume control system. Do not down the volume of the master unit too much as doing so may cause the sound quality to deteriorate. •When you connect this unit to the master unit, the loudness function will not work. •The sound becomes unclear in some situations (such as when the BAS, TRE or EQ are excessively boosted). •Two units can not be used at same time. About operation mode This unit has three operation modes. Sound Control Mode Select the item or adjust it partially. •EQ (Graphic Equalizer): Select the equalizer curve. •POS (Listening Position): Select the listening position. •SUB (Subwoofer): Adjust the subwoofer volume level. Sound control mode can adjust not only BAS, TRE, BAL, FAD but also VOL. For further details, read the master unit instructions. Sound Tuning Mode Tune in the item selected in the Sound Control Mode exactly. •EQ (Graphic Equalizer): Setting and registering the equalizer curve. •POS (Listening Position): Adjust the listening position. •CNW (Cross Over Network): Adjust the cutoff frequency. Name Edit Mode EQ (Graphic Equalizer): Naming the equalizer curve. EN Getting Started EN EN DSP Selecting the stored equalizer curve — Sound Control Mode You can select the stored equalizer curve (MEMORY1 to MEMORY9) or an unadjusted curve (FLAT). 1 Press (SOURCE) to select a source (radio, tape, CD or MD etc.). 2 Press (SOUND) repeatedly until “EQ” appears. EQ 1 MEMORY1EQ 3 Rotate/press (+) or (–) to select the stored equalizer curve. After three seconds, the display goes back to the normal playback mode. Tip To adjust the stored equalizer curve further, press (SOUND) for two seconds within three seconds after following step 3 above. Then go to step 4 to 8 of “Setting and storing the equalizer curve.” Setting and storing the equalizer curve — Sound Tuning Mode You can adjust the 21 band frequencies to make an equalizer curve, and store up to nine curves. Front (18 band): 30 Hz, 45 Hz, 62 Hz, 90 Hz, 130 Hz, 190 Hz, 270 Hz, 400 Hz, 580 Hz, 840 Hz, 1.2 kHz, 1.7 kHz, 2.5 kHz, 3.6 kHz, 5.2 kHz, 7.5 kHz, 11 kHz, 16 kHz Rear (3 band): 90 Hz, 840 Hz, 7.5 kHz 1 Press (SOURCE) to select a source (radio, tape, CD or MD etc.). 2 Press (SOUND) for two seconds. 3 Press (SOUND) repeatedly until “EQ” appears. EQ Tuning 1 MEMORY1EQ 4 Rotate/press (+) or (–) to select an equalizer curve. 5 Adjust the equalizer curve. 1 Press (4) (n) ...