Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Getting Started
DSP
Operating this unit
Selecting the stored
You can control this unit by a Sony Master
equalizer curve
unit.
— Sound Control Mode
Some master units have (+)/(–) (volume)
buttons, and some have a dial.
You can select the stored equalizer curve
This instructions shows as follow.
(MEMORY1 to MEMORY9) or an unadjusted
Rotate/press (+) or (–).
curve (FLAT).
Note
There may be a difference between the display items of this
1 Press (SOURCE) to select a source (radio,
manual and the master unit.
tape, CD or MD etc.).
Note in operation
• The unit has a digital volume control system.
2 Press (SOUND) repeatedly until “EQ”
Do not down the volume of the master unit
appears.
too much as doing so may cause the sound
EQ
quality to deteriorate.
EN
SUR EQ
• When you connect this unit to the master
1 MEMORY1
unit, the loudness function will not work.
• The sound becomes unclear in some
3 Rotate/press (+) or (–) to select the
situations (such as when the BAS, TRE or EQ
stored equalizer curve.
are excessively boosted).
• Two units can not be used at same time.
After three seconds, the display goes back
to the normal playback mode.
About operation mode
Tip
To adjust the stored equalizer curve further, press
(SOUND) for two seconds within three seconds after
This unit has three operation modes.
following step 3 above. Then go to step 4 to 8 of “Setting
and storing the equalizer curve.”
Sound Control Mode
Select the item or adjust it partially.
• EQ (Graphic Equalizer): Select the equalizer
curve.
• POS (Listening Position): Select the listening
Setting and storing the
position.
equalizer curve
• SUB (Subwoofer): Adjust the subwoofer
volume level.
— Sound Tuning Mode
Sound control mode can adjust not only BAS,
TRE, BAL, FAD but also VOL. For further
You can adjust the 21 band frequencies to
details, read the master unit instructions.
make an equalizer curve, and store up to nine
Sound Tuning Mode
curves.
Front (18 band):
Tune in the item selected in the Sound Control
30 Hz, 45 Hz, 62 Hz, 90 Hz, 130 Hz, 190 Hz,
Mode exactly.
270 Hz, 400 Hz, 580 Hz, 840 Hz, 1.2 kHz,
• EQ (Graphic Equalizer): Setting and
1.7 kHz, 2.5 kHz, 3.6 kHz, 5.2 kHz, 7.5 kHz,
registering the equalizer curve.
11 kHz, 16 kHz
• POS (Listening Position): Adjust the
Rear (3 band):
listening position.
90 Hz, 840 Hz, 7.5 kHz
• CNW (Cross Over Network): Adjust the cut-
1 Press (SOURCE) to select a source (radio,
off frequency.
tape, CD or MD etc.).
Name Edit Mode
EQ (Graphic Equalizer): Naming the equalizer
2 Press (SOUND) for two seconds.
4
curve.
Actual total number:
Sony XDP-210EQ (E) 3-856-153-12 (1)
...