CAUTION Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. The apparatus shall not be exposed to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the apparatus. FCC Statement This equipment has been tested and found to comply with the limits for a

A clamp ring and four clamp screws hold the foot bracket to the speaker. Mount the foot bracket to a wall or ceiling using screws through the two holes in the foot bracket. Removing the foot bracket from the speaker may make mounting easier. After mounting, aim the speaker on its ball/swivel mount by loosening the clamp screws, adjusting the speaker, and retightening the screws. Be sure that both the fasteners and the mounting surface can safely support the weight of the speaker, especially in e

SOUND Button (On Remote Control Only) This button allows you to switch on/off 3D surround effect. / (Play/Pause) (On Remote Control Only) – Press this button on the remote control to begin playback on your iPad/iPhone/iPod. Press again to Pause playback. / Skip Forward/Back buttons (On Remote Control Only) - During playback press to skip forward or backward to the next or previous track. MENU button (On Remote Control Only)- If an iPod is docked and the Acoustic Research Dock Plus App is not run

Polarity is indicated by a color stripe on the insulation, by ridges molded into the insulation, or by the colors of the wire - one copper and one silver. Strip the insulation from the speaker wire ends to reveal the bare conductors before connecting to a speaker, subwoofer or receiver. Always connect the red (+) terminal on the receiver to the red (+) terminal on the Subwoofer, and connect the black (-) terminal on the receiver to the black (-) terminal on the Sub- woofer. The same is true for

In AUTO ON, the Subwoofer is in standby mode until it detects an audio signal input, then the Subwoofer turns on automatically. A few minutes after audio input signals cease, the Subwoofer automatically returns to standby mode. POWER INDICATOR LED This LED is unlit when the AC power switch is OFF. It glows red when the Subwoofer is in standby mode ad green when the Subwoofer is on. FUSE 250V 2A This fuse protects against internal and external faults. If the POWER switch is ON and the power indic

A few minutes after audio input signals cease, the Subwoofer automatically returns to standby mode. POWER INDICATOR LED This LED is unlit when the AC power switch is OFF. It glows red when the Subwoofer is in standby mode ad green when the Subwoofer is on. FUSE 250V 2A This fuse protects against internal and external faults. If the POWER switch is ON and the power indicator LED is unlit, unplug the power cord from the AC and the back of the amplifier, then pry up the rectangular fuse holder and

Refer all servicing to qualified AR service personnel. DAMAGE REQUIRING SERVICE -Refer servicing to qualified service personnel under the following conditions: A. If liquid has been spilled, or objects have fallen into the product. B. If the product has been exposed to rain or water. C. When the product exhibits a distinct change in a performance REPLACEMENT PARTS - When replacement parts are required, be sure the service technician has used replacement parts specified by AR or those having the

b) Stereo operation: You need an additional AW850 speaker for the stereo option. Set the L/M/R switch to “L” on the speaker located to the left from the listener, and set the other speaker to the “R” position. Notes: A single AW850 transmitter can send its signal to more than two speakers. All you need to do is tune the speakers to the single transmitter. The speaker automatically retunes if it loses the transmitter’s signal. You can also press the Auto Scan button on the bottom of the speaker t

Powering the Speaker There are two options to power your wireless speaker: using the included AC power adapter or using 6 AA batteries (not included). AC Power Adapters Connecting to an A/V Receiver 1. Plug the transmitter’s built-in AUDIO INPUT cable into a mini-jack to RCA adapter (not included). 2. Connect the stereo plugs on the mini-jack to RCA adapter to the corresponding left and right audio outputs of your A/V receiver, amp, or other audio source. Model AW828 Installation and Operation M

Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Clean only with dry cloth. 6. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 7. Do not install near any heat sources such as radiators, heat register