Оценок - 3, средний балл: 5
(
)
)
|
Фрагмент инструкции
Powering the Speaker There are two options to power your wireless speaker: using the included AC power adapter or using 6 AA batteries (not included). AC Power Adapters Connecting to an A/V Receiver 1. Plug the transmitter’s built-in AUDIO INPUT cable into a mini-jack to RCA adapter (not included). 2. Connect the stereo plugs on the mini-jack to RCA adapter to the corresponding left and right audio outputs of your A/V receiver, amp, or other audio source. Model AW828 Installation and Operation Manual Wireless Indoor/Outdoor Speaker With Planter Transmitter AC/DC 12V 100mA adapter Note: There is no transmitter ON/OFF switch. The transmitter is designed to be left plugged in and powered at all times. If you will not be using the AW828 for an extended period of time, unplug the transmitter AC power adapter. Audio source Transmitter (back panel) A/V Receiver Audio Output Transmitter (back panel) Mini-jack to RCA adapter (not included) ANALOG INPUT cable (built in) connects to your sound source using one of the connection options shown here Speaker Battery compartment cover ON/OFF/TUNE button turns the speaker on and off (push and hold), and tunes the speaker to the transmitter if you are having problems linking (push). POWER indicator turns red when the speaker is first turned on; it turns blue when the speaker is tuned to the transmitter. – VOLUME + adjusts the speaker’s volume. Back Panel Back panel door keeps the back panel safe from the elements when not in use; pull up on the tab on the right side of the door to access the back panel. DC IN jack receives the small round end of the included 12V 600mA AC power adapter. Back panel door L/Mono/R switch determines if the speaker plays sound in mono as a stand-alone speaker, or plays the left or right track in a stereo pair with an additional AR wireless speaker Speaker AC/DC 12V 600mA adapter AC power adapter 120V AC wall outlet 1. Insert the small, round plug from the speaker AC Back of the speaker power adapter into the DC IN jack on the back of the speaker. 2. Plug the other end of the speaker AC power adapter into any standard 120V AC wall outlet. Note: Be sure to use the speaker AC power adapter rated 12V DC 600 mA. Installing Batteries in the Speaker 1. Remove the battery compartment cover on the top of the speaker. 2. Insert six (6) AA batteries (not included) into the speaker following the polarity (”+” and “-”) as diagrammed inside the battery compartment. 3. Replace the battery compartment cover on the top of the speaker. Note: Keep the door covering the speaker back panel closed when using batteries. DO NOT mix batteries with different chemistry types (for example, a zinc battery with an alkaline battery). DO NOT mix new and used batteries. DO NOT leave batteries installed in the product when not in use for long periods. Always remove old, weak or worn-out batteries promptly and recycle or dispose of them in accordance with local and national regulations. Warning: This product is water-resistant, not waterproof. Avoid prolonged exposure to wet environments, such as rain, mist, dew, etc. In other words, you can take it out, just don’t leave it out. If you plan to use the speaker in a humid or wet environment, we recommend powering it with batteries instead of with the power adapter. Pairing the Speaker System Pairing the Speaker System Adjusting the Transmitter 1. Turn on your audio source (for example, A/V receiver, MP3 player, stereo, etc.) and play music at a normal listening volume. 2. Set the channel select switch on the back of the transmitter to one of the transmitter’s three broadcast frequencies: 1, 2 or 3. If you experience poor reception or interference, try choosing a different frequency by moving the channel select switch to another position. When the transmitter is receiving an audio signal and is ready, the POWER indicator on the transmitter’s front panel turns solid blue. Channel select switch Note If the POWER indicator on the transmitter does not turn blue, please check the following: - Confirm the transmitter AC power adapter is securely connected. - Confirm the cable from the transmitter is securely connected to the audio source output (MP3 player, A/V receiver, etc.). -Confirm the audio source is playing audio and is turned up. Tuning the Speaker 1. Press and hold the ON/OFF/TUNE button on the front of the speaker until the POWER indicator turns red. This indicator light stays red while the speaker is tuning to the transmitter. The indicator light turns blue when the speaker is tuned to the transmitter—you should hear sound coming from the speaker now. Note: If the speaker is not tuned or if the transmitter is not connected properly, the indicator light will stay red. If this occurs, please see the troubleshooting section of this manual. 2. Press the – VOLUME + buttons to adjust the volume on the speaker as desired. 3. Set up the speaker for mono or stereo operation using the switch on the back of the AW828 speaker. a) Monaural op...