Оценок - 2, средний балл: 3
(
)
)
|
Фрагмент инструкции
MAGNETIC SHIELDING While the LS-C50/LS-C100 is magnetically shielded, stray magnetic fields can still exist. Placing your LS-C50/LS-C100 speakers on top or beside your CRT based television should not cause any interference. In the case where there is some minor discoloration, simply move the speaker forward or backwards or away from the television a few inches, this generally resolves the issue. Note: LCD, DLP and Plasma displays do not suffer from magnetic interference. CONNECTING YOUR SPEAKERS All of the models in the LS Series have the same high quality plated binding post connectors, so connection to each channel offers the same options. You should utilize high quality speaker cables, up to 12 gauge (AWG). The LSSeries will accept a variety of connector types including spade lugs, banana jacks, or pin type connectors. The best connector in our opinion is the "Spade lug" as it provides more contact area with the terminal and allows the binding post to be tightened for a secure connection. Audiophiles and novices alike have preferences as to which connector type they favor, speak with your Authorized athena TECHNOLOGIES® retailer as to which is the best for your Audio Video System. Rest assured, plain speaker wire is more than acceptable, you can always upgrade your wires and/or connectors later on. owners manual To connect your speaker system: Start at one speaker, and connect one channel at a time, starting with the front speakers. Always ensure that the entire A/V system is powered OFF before performing any connections. The positive and negative (red and black) sides of the speaker terminals MUST match the positive and negative (red and black) terminals of the receiver or amplifier. If they do not match, abnormal sound and a lack of bass response will result. After connecting the front speakers, connect the rest of the speakers to their appropriate channels of the receiver or amplifier. TRADITIONAL CONNECTION METHOD (Please see diagram 1) 1) Using your choice of speaker wire and termination method, connect the speaker cable (minding the positive and negative polarities), to the set of connectors. Ensure the terminals are tight. 2) Repeat the procedure for the second speaker. POSITIONING AND INSTALLING YOUR SPEAKERS Left and Right Main Speakers (LS-50, LS-100, LS-300, LS-500) The main speakers are usually placed in the front of the room, on either side of the TV or video projector. They should be placed a minimum of 6 feet apart, and if the furniture placement allows, keep them at least 12 inches from all walls. To calculate the best placement, measure the distance between the speakers themselves and the listening position. Your distance from the speakers should be roughly 1.5 times the distance the speakers are apart from each other. For example: If the distance between each speaker and the listening position is 9 feet, then the speakers should be 6 feet apart from one another. This will provide excellent stereo separation and imaging for mu...
Эта инструкция также подходит к моделям:Акустика - LS-50 (398.64 kb)
Акустика - LS-100 (398.64 kb)
Акустика - LS-300 (398.64 kb)
Акустика - LS-500 (398.64 kb)