Войти:
Оценок - 4, средний балл: 3.8 ( )

Инструкция по эксплуатации Athena Technologies, модель LS-100

Производитель: Athena Technologies
Размер: 398.64 kb
Название файла:
Язык инструкции:itenesfrdenlptda
Перейти к скачиванию



Фрагмент инструкции


Ensure the terminals are tight. 2) Repeat the procedure for the second speaker. POSITIONING AND INSTALLING YOUR SPEAKERS Left and Right Main Speakers (LS-50, LS-100, LS-300, LS-500) The main speakers are usually placed in the front of the room, on either side of the TV or video projector. They should be placed a minimum of 6 feet apart, and if the furniture placement allows, keep them at least 12 inches from all walls. To calculate the best placement, measure the distance between the speakers themselves and the listening position. Your distance from the speakers should be roughly 1.5 times the distance the speakers are apart from each other. For example: If the distance between each speaker and the listening position is 9 feet, then the speakers should be 6 feet apart from one another. This will provide excellent stereo separation and imaging for music playback. This is just a starting point, the room's acoustics and furniture placement will vary the placement of the speaker. Use your best judgment and experiment with speaker placement. Slight adjustments can provide significant improvements in performance. LS-50/LS-100 The LS-100 is designed to be used as a front left or right speaker, or as a rear channel speaker. When installing the LS-100 bookshelf speakers to a wall, there is an insert built into the back of the speaker, located above the input terminals. The threaded insert is designed specifically for the athena TECHNOLOGIES® Macromount™ bracket, which is available from your local authorized athena TECHNOLOGIES® retailer. Please see diagram 2. When the LS-50/LS-100 is to be installed on a bookshelf or on a stand, please attach the 4 rubber bumpers to the bottom of the speaker, as this will protect both the mounting surface and the speaker from damage. Simply peel the bumper off its sheet and stick it in place on the bottom of the speaker, one bumper per corner. The rubber bumpers also help decouple the speaker from the bookshelf or stand. Please see diagram 3. owners manual LS-C50/LS-C100 When the LS-C50/LS-C100 is used as a center speaker, it is ideally placed as close to the center of the TV or video projector as possible. This is to ensure that voices and all sounds come from the performer's placement on screen. This may be on top, underneath, or on a shelf within a wall unit or other furniture. Use the position that provides the best sound quality, but keep in mind safety and room decor as well. The center channel works best when the front of the speaker is flush with the TV, or the shelf it rests on. If the center speaker is recessed in its placement, it will sound distant, and undefined in character. When the LS-C50/LS-C100 is to be installed on top of a television, in a cabinet or on a shelf, please use the included table top mount. Please see diagram 4. FINE TUNING Before beginning any fine tuning, please ensure all connections are properly made and your speakers have had the chance to break-in for a minimum of 100 hours. This will...

Эта инструкция также подходит к моделям:
Акустика - LS-50 (398.64 kb)
Акустика - LS-300 (398.64 kb)
Акустика - LS-500 (398.64 kb)
Акустика - LS-C100 (398.64 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории