Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Altos R360 F3 Installation Configuration Guide
NOTE. Please load the RAID driver during OS installation.
NOTE. You need an external USB floppy drive or USB Flash
drive to load RAID driver during the OS installation.
NOTE. Please copy Intel Integrated RAID Module driver from
Resource Kit DVD to a USB floppy drive or USB flash drive.
NOTE. For OS installation, a USB optical drive is required
as well.
1.
Please boot the system from the Windows Server 2012 R2 DVD. Follow the
instructions to do the installation.
2.
When “Where do you want to install Windows” message displayed, please
Insert the USB flash which includes the RAID driver and click on “Load Driver”.
3.
Browse to the folder that includes the Integrated Hardware RAID driver and click
OK.
4.
It will show the available driver. Please select “megasas2.inf” as target driver.
5.
After the RAID driver is loaded, please click Drive options to partition the drive
or click Next to use default disk partition.
6.
Follow the normal procedure to finish the installation n.
Chipset Driver Package Installation
1.
Please insert the Resource Kit DVD into the optical drive
2.
Select model and click on Drivers.
3.
Find the Chipset Driver by expanding the directory in the following order, Altos
R360 F3 -> Onboard Chipset
4.
Select WS2012/WS2012 R2 then click on Browse.
5.
Double-click on Setup.exe and follow the instructions to complete the driver
installation.
Gigabit Ethernet Driver Installation
1.
Please insert the Resource Kit DVD into the optical drive
2.
Select model and click on Drivers.
3.
Find the Gigabit Ethernet Driver by expanding the directory in the following
order, Altos R360 F3 -> Onboard Network.
4.
Select WS2012/WS2012 R2 then click on Browse.
5.
Double-click on Windows_x64_Install.bat.
6.
Follow the instructions, accept the license agreement and use the default setting
to complete the driver installation.
9
...