Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
Symboles Nous donnons ci-dessous les symboles utilises pour le chargeur et la batterie. Assurez-vous que vous en avez bien compris la signification avant d’utiliser l’outil. Simbolos A continuacion se muestran los simbolos utilizados con el cargador y la bateria. Asegurese de que entiende su significado antes de usarla. . Ready to charge . Pret a recharger . Preparacion para la carga . Charging . En charge . Cargando . Charging complete . Recharge terminee . Completada la carga . Delay charge (Cooling) . Charge differee (Refroidissement) . Retraso de la carga (enfriamiento) . Defective battery . Batterie defectueuse . Bateria defectuosa . Conditioning . Recharge normale . Acondicionamiento . Cooling abnormality . Probleme de refroidissement . Anormalidad en la carga . Do not short batteries. . Ne jamais court-circuiter les bornes d’une batterie. . No provoque un cortocircuito en las baterias. ENGLISH ENGLISH Model DC18SC DC24SA Input ................................................................A.C. 120 V 50 – 60 HZ A.C. 120 V 50 – 60 HZ Output .............................................................D.C 7.2 V – 18 V D.C 7.2 V – 18 V Weight .............................................................1.0 kg (2.2 lbs) 1.7 kg (3.7 lbs) IMPORTANT SAFETY INSTRUCTIONS CAUTION: 1. SAVE THESE INSTRUCTIONS — This manual contains important safety and operating instructions for battery charger. 2. Before using battery charger, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery. 3. CAUTION — To reduce risk of injury, charge only MAKITA rechargeable batteries marked on the charger label. Other types of batteries may burst causing personal injury and damage. 4. Non-rechargeable batteries cannot be charged with this battery charger. 5. Use a power source with the voltage specified on the nameplate of the charger. 6. Do not charge the battery cartridge in presence of flammable liquids or gases. 7. Do not expose charger to rain or snow. 8. Never carry charger by cord or yank it to disconnect from receptacle. 9. After charging or before attempting any maintenance or cleaning, unplug the charger from the power source. Pull by plug rather than cord whenever disconnecting charger. 10. Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress. 11. Do not operate charger with damaged cord or plug — replace them immediately. 12. Do not operate or disassemble charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman. Incorrect use or reassembly may result in a risk of electric shock or fire. 13. The battery charger is not intended for use by young children or infirm persons without supervision. 14. Young children should be supervised to ensure that they do not play with the battery charger. 15. Do not charge battery cartridge when temperature is BELOW 10°C (50°F) or ABOVE 40°C (104°F). 16. Do not attempt to use a step-up transformer, an engine generator or DC power receptacle. 17. Do not allow anything to cover or clog the charger vents. Charging 1. Plug the battery charger into the proper AC voltage source. Two charging lights will flash in green color repeatedly. 2. Insert the battery cartridge into charger until it stops adjusting to the guide of charger. Terminal cover of charger can be opened with inserting and closed with pulling out the battery cartridge. 3. When the battery cartridge is inserted, the charging light color will change from green to red and charging will begin. The charging light will keep lighting up lit steadily during charging. One red charging light indicates charged condition in 0 – 80% and two red ones indicates 80 – 100%. 4. With finish of charge, the charging lights will change from two red ones to two green ones. 5. If you leave the battery cartridge in the charger after the charging cycle is complete, the charger will switch into its “trickle charge (maintenance charge)” mode which will last approximately 24 hours. 6. After charging, unplug the charger from the power source. NOTE: • The battery charger is for charging Makita-battery cartridge. Never use it for other purposes or for other manufacturer’s batteries. • When you charge a battery cartridge which is new or has not been used for a long period of time, it may not accept a full charge until after discharging it completely and recharging a couple of times. • If you charge a battery cartridge from a just-operated tool or battery cartridge which has been left in a location exposed to direct sunlight for a long time, the charging light may flash in red color. If thi...
Эта инструкция также подходит к моделям:Зарядные устройства - DC18SC DC24SA (89.9 kb)