Войти:
Оценок - 2, средний балл: 5 ( )

Инструкция по эксплуатации Fisher-Price, модель H7461

Производитель: Fisher-Price
Размер: 163.19 kb
Название файла: H7461b-0920.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


-Use of Power Wheels® components in products other than Power Wheels® vehicles could cause overheating, fire or explosion. • The battery must be handled by adults only. The battery is heavy and contains sulfuric acid (electrolyte). Dropping the battery could result in serious injury. • Never allow children to charge the battery. Battery charging must be done by adults only. A child could be injured by the electricity involved in charging the battery. • Read the safety instructions on the battery. • Examine the battery, charger and their connectors for excessive wear or damage each time you charge the battery. If damage or excessive wear is detected, do not use the charger or the battery until you have replaced the worn or damaged part. 4 CHARGING INSTRUCTIONS CHARGING INSTRUCTIONS Approximate Status Charge Time Solid Red Charging -Flashing Green Ready for Use 2 hours Solid Green 100% (Full)* 6-8 hours Flashing Red No Charge** -* For maximum battery life, charge battery 100% (solid green) every other charge. **Error - wrong or dead battery. 5 12 Volt Battery Power Cord Charger Connector Charger Wall Outlet Power Cord CHARGING INSTRUCTIONS 12 Volt Battery Power Cord Charger Connector Charger Wall Outlet Power Cord CHARGING INSTRUCTIONS • Plug the power cord into the charger. • Plug the charger connector into the 12-volt battery. • Plug the power cord into a standard 120 volt wall outlet. Note: The charger may be hot to the touch while charging. New batteries may make a “sizzling” or “bubbling” noise and swell slightly. These are normal conditions and do not indicate a problem. • Charge the battery 100% (solid green) or Ready for Use (flashing green). For maximum battery life, charge battery 100% (solid green) every other charge. • Unplug the charger from the wall outlet when not in use. PRINTED IN CHINA H7461b-0920 6 PROBLEMS AND SOLUTIONS PROBLEMS AND SOLUTIONS Problem Possible Cause Solution No status light No power Make sure power flow to the wall outlet to charger is “ON”. Loose connections Check connections of all plugs. Make sure the charger connector is tightly plugged into the battery and the power cord connector is tightly plugged into both the charger and the wall outlet. Bad charger There is no sure way to tell if your charger is working unless you have a volt meter. If you suspect there is a problem with your charger, contact Power Wheels® Consumer Relations. Wrong battery This charger is intended for use only with a Power Wheels® 12-volt lead acid battery. Flashing red Loose connections Check connection of all plugs. Make sure status light the charger connector is tightly plugged into the battery and the power cord connector is tightly plugged into both the charger and the wall outlet. Undercharged Battery needs a 100% (solid green) battery charge every other use. Battery dead Replace battery with a new, Power Wheels® 12-volt lead acid battery. Solid red Undercharged Charge battery 100% (solid green) or status light battery Ready for Use (flashing green). 7 PROBLEMS AND SOLUTIONSPROBLEMS AND SOLUTIONS Problem Possible Cause Solution Battery is warm Normal while No action required. while charging quick charging Charger is hot Normal while No action required. while charging quick charging Short vehicle run Undercharged Charge battery 100% (solid green) or time or vehicle battery Ready for Use (flashing green). runs sluggishly Flashing green Battery dead status light - but vehicle does not run Solid green Battery dead status light - but vehicle does not run Flashing green status light does not progress to a solid green status light after 6-8 hours of charging and vehicle does not run Battery may be dead In rare situations, a severely depleted (dead) battery will give a false, Ready for Use (flashing green) status. Try charging the battery again for 6-8 hours. If your vehicle still won’t run, you will need to replace your battery with a new, Power Wheels® 12-volt lead acid battery. In rare situations, a severely depleted (dead) battery will give a false, 100% (solid green) status. Try charging the battery again for 6-8 hours. If your vehicle still won’t run, you will need to replace your battery with a new, Power Wheels® 12-volt lead acid battery. Unplug the charger from the battery and wall outlet for at least 12 hours. Now, charge the battery again for 6-8 hours. If the status light flashes red, or you get the same results, replace the battery with a new, ...

Эта инструкция также подходит к моделям:
Зарядные устройства - J1718 (163.19 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории