Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
• One of either “C1” to “C6” blinks. e Push [ Y YY] (or [ Z ZZ]) to scroll the message. • Push [ Z ZZ] or [ Y YY] to move the cursor to left or right, respectively. r Push [.• ENT ] (or [D• CLR] ) to exit OPTION SET MODE. ¦ ¦ A GPS receiver (RS-232 output/format/4800 bps) can be connected to [DATA] jack of the IC-V82/U82 to indicate current position (Latitude and The position data can also be transmitted with a message D DD Position indication q While connected to a GPS receiver, push [A• FUNC] and [0• OPT] to enter OPTION SET MODE. w Push [ Y YY] or [ Z ZZ] several times to select the GPS setting. • “GPS” appears. e Rotate [VOL] to select the suitable sentence formatter for the connecting GPS receiver. • Sentence formatters 1 GLL 6 GLL, GGA 11 GGA, GSA 16 GLL, GGA, RMC 21 GLL, GSA, VTG 2 GGA 7 GLL, RMC 12 GGA, VTG 17 GLL, GGA, GSA 22 GGA, RMC, GSA 3 RMC 8 GLL, GSA 13 RMC, GSA 18 GLL, GGA, VTG 23 GGA, RMC, VTG 4 GSA 9 GLL, VTG 14 RMC, VTG 19 GLL, RMC, GSA 24 GGA, GSA, VTG 5 VTG 10 GGA, RMC 15 GSA, VTG 20 GLL, RMC, VTG 25 RMC, GSA, VTG DIGITAL MODE OPERATION 11 rPush [ Y YY] twice to select the position tPush and hold [0• OPT] for 1 sec. to enter the position indication. • Latitude and longitude date appear in order AppearsAppears Appears North or South Degrees Minutes Seconds Push Push AppearsAppears Appears 11 Seconds Minutes East or West Degrees yAfter checking the current position, push [ . • ENT ] (or [D• CLR] ) to return to normal operating mode. IMPORTANT: When setting the sentence formatter in step e for connection to a GPS receiver, and you have already programmed your own call sign, the GPS transmit setting will automatically activate to every 3 minutes. The automatic transmission can be changed to an interval time or deactivated, if desired. (see the next page) 11 11 D DD GPS Automatic transmission q While connected to a GPS push [A• FUNC] and [0• OPT] to enter OPTION SET MODE. w Push [ Y YY] or [ Z ZZ] several times to select the GPS transmission. • “GtX” appears. e Rotate [VOL] to set the interval time for the GPS automatic transmission. • Interval time is selectable from 0.5 (30 sec.), 1, 3, 5, 10, 30 rPush [ Y YY] three times to select the transmit message selection, if desired. • GPS Tx message is selectable from OFF and C1 to C6. • Tx message must be programmed in advance. (see page 56 for setting) tPush [.• ENT ] (or [D• CLR] ) to exit OPTION SET MODE. IMPORTANT: GPS Automatic transmission every setting interval even communication. To prevent interference to other set the the Repeater lockout busy lockout) in INITIAL SET MODE. (p. 64) D DD Receiving a GPS transmission q Push [A• FUNC] and [0• OPT] to enter OPTION SET MODE. w Push [ Y YY] or [ Z ZZ] several times to select the received position. • “RXP.OS” appears. ePush and hold [0• OPT] for 1 sec. to enter the position indication. • Latitude data and longitude date appear by every pushing [ Y YY] or [ Z ZZ] . rPush [0• OPT] to return OPTION SET MODE, then push [ Y YY] twice to select the received GPS message. tPush and hold [0• OPT] for 1 sec. to enter the message. • Received message is indicated, push [ Z ZZ] or [ Y YY] to move the cursor to left or right, respectively. yAfter checking a received position or message, push [.• ENT ] (or [D• CLR] ) to return to normal operating mode. SET MODE D DD Entering SET MODE q Push [A• FUNC] , then push [8• SET] to enter SET MODE. w Push [ Y YY] or [ Z ZZ] to select the desired item. e Rotate [VOL] to select the condition/value. • To exit SET MODE, push [.• ENT ] (or [D• CLR] ). Enter Set Exit FUNC A SET 8 ENT [VOL] NOTE: When the display type setting (pgs. 16, 65) in INITIAL SET MODE is selected other than “FR” (“CH” or “nm”) and accessing SET MODE from memory mode, most of set mode items are restricted. OTHER 12 D DD Repeater tone frequency Selects tone encoder frequency etc. from one of 50 available frequencies. • 67.0–254.1 Hz (50 tones): 88.5 Hz (default) D DD Tone squelch frequency Selects frequency for tone squelch or pocket beep operation from one of 50 available frequencies. • 67.0–254.1 Hz (50 tones): 88.5 Hz (default) 11 12 • Available subaudible tone frequencies 67.0 79.7 94.8 110.9 131.8 156.7 171.3 186.2 203.5 229.1 69.3 82.5 97.4 114.8 136.5 159.8 173.8 189.9 206.5 233.6 71.9 85.4 100.0 118.8 141.3 162.2 177.3 192.8 210.7 241.8 74.4 88.5 103.5 123.0 146.2 165.5 179.9 196.6 218.1 250.3 77.0 91.5 107.2 127.3 151.4 167.9 183.5 199.5 225.7 254.1 12 12 S D DD DTCS code Selects DTCS (both encoder/squelch operation. Total of 104 codes are available. • 023–754: 023 (default) D DD DTCS polarity Selects DTCS polarities for transmission and reception “nn (default),” “nR,” “Rn” and “RR.” (n: normal/R: reverse) D DD Tuning step Selects tuning step from 5, 10, 12.5, 15, 20, 25, 30 and 50 kHz for [ Y YY]/[ ZZ] or [VOL] ( When [VOL] is assigned as tuning dial) operation. (default value may differ depending on transceiver types and versions) D DD Offset frequency Sets the duplex offset frequency within...
Эта инструкция также подходит к моделям:Рации - IC-U82 (4.11 mb)