Оценок - 2, средний балл: 5 ( )

Производитель: DeWalt Размер: 436.19 kb Название файла: Язык инструкции:

1. The red light will blink continuously indicating that the 1-hour charge cycle has started. 2. When the 1-hour charge cycle is complete, the light will stay on continuously and will no longer blink. This indicates that the pack is fully charged and can be used at this time. 3. Whenever the pack is left in the charger after the initial 1-hour charge, the charger will begin the Automatic Tune-Up™ Mode. This mode continues up to 8 hours or until the individual cells in the battery pack are equalized. The battery pack is ready for use and can be removed at any time during the Tune-Up™ Mode. 4. Once the Automatic Tune-Up™ Mode is complete the charger will transition to a maintenance charge; no completion of the Automatic Tune-Up™ Mode. USING THE MANUAL TUNE-UP™ MODE The manual Tune-Up™ mode equalizes or balances the individual cells in the battery pack at its peak capacity. This mode takes up to 8 hours to complete. Battery packs should be tuned up 10 charge/discharge cycles or whenever the pack no the same amount of work. 1. To tune up your battery pack, place the battery in the charger usual. The red light will blink continuously indicating that the charge cycle has started. 2. Press the Tune-Up™ Mode button any time after the charge cycle has started. The red light will stop blinking momentarily, blink quickly 3 times, and then resume blinking continuously. The charger is now tuning up the cells in your battery. 3. When the Tune-Up™ mode cycle is complete, the light will stay on continuously. The pack is fully charged and may be used at this time or left in the charger. 4. If you select Tune-Up™ Mode and then change your mind, remove the battery from the charger. After 5 seconds, insert the battery into the charger. The normal charge cycle will begin. Charge Indicators HOT/COLD PACK DELAY When the charger detects a battery that is excessively hot or excessively cold, it automatically starts a Hot/Cold Pack Delay, suspending charging until the battery temperature has normalized. After this happens, the charger automatically switches to the Pack Charging mode. This feature ensures maximum battery life. The red light flashes long, then short while in the Hot/Cold Pack Delay mode. REPLACE PACK These chargers are designed to detect certain problems that can arise with battery packs which would be indicated by the red light flashing at a fast rate. If this occurs, re-insert battery pack. If problem persists, 4 try a different battery pack to determine if the pack charges correctly, then the original pack is defective and be returned to a service center for recycling. gives the same trouble indication as the original, at an authorized service center. PROBLEM POWER LINE When these chargers are used with some portable such as generators or sources that convert DC to AC, may temporarily suspend operation, flashing the red light with two fast blinks followed by a pause. This indicates the power source is out of limits. Your power supply may need service. LEAVING THE BATTERY PACK IN THE CHARGER The charger and battery pack can be left connected with the red light glowing indefinitely. The charger will keep the battery pack fresh and fully charged. NOTE: A battery pack will slowly lose its charg...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: