Войти:
Оценок - 4, средний балл: 4 ( )

Инструкция по эксплуатации Amana, модель KO SANTO 290-6I

Производитель: Amana
Размер: 186.57 kb
Название файла: 215436en.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


Leave the freezer compartment door open. 4. Insert the plastic scraper into the recess provided under the defrost water channel and place a collecting basin under it. 5. Once defrosting is completed keep the scraper for future use; 6. Turn the thermostat knob to the required setting or replace the plug in the power socket. Warning! Never use metal tools to scrape off the frost Do not use a mechanical device or any artificial means to speed up the thawing process other than those recommended by the manufacturer. A temperature rise of the frozen food packs, during defrosting , may shorten their safe storage life. Switching off the appliance To switch off the appliance, turn the temperature regulator to position "0". If the appliance is not going to be used for an extended period: 1. Remove all refrigerated and deep-frozen packages as well as ice trays. 2. Switch off the appliance by turning the temperature regulator to position "0". 3. Remove the mains plug or switch off or turn out the circuit breaker or fuse. 4. Defrost freezer compartment and clean thoroughly (see section: OCleaning and CareO). 5. Leave the door open to avoid the build up of odours. Cleaning and Care For hygienic reasons the appliance interior, including interior accessories, should be cleaned regularly. Warning! . The appliance may not be connected to the mains during cleaning. Danger of electrical shock! Before cleaning switch the appliance offand rem ve the plug from the mains, or switch off or turn out the circuit breaker or fuse. . Never clean the appliance with a steam cleaner. Moisture could accumulate in electrical components, danger of electrical shock! Hot vapours can lead to the damage of plastic parts. . The appliance must be dry before it is placed back into service. Attention! . Ethereal oils and organic solvents can attack plastic parts, e.g. . lemon juice or the juice from orange peals; . butyric acid; . cleansers which contain acetic acid. Do not allow such substances to come into contact with appliance parts. . Do not use any abrasive cleansers. 1. Remove frozen food and the food from the refrigerator. Wrap frozen food in several layers of newspaper. Store it in a cool place, well covered. 2. Defrost the freezer compartment prior to cleaning (see "Defrosting" section). 3. Switch the appliance off and remove the plug from the mains, or switch off or turn out the circuit breaker or fuse. 4. Clean the appliance and the interior accessories with a cloth and lukewarm water. Commercially available dish washing detergents may also be used. 5. After cleaning wipe with fresh water and rub dry. Accumulation of dust at the condenser increases energy consumption. For this reason carefully clean the condenser at the back of the appliance once a year with a soft brush or a vacuum cleaner. 6. Check the water drain hole on the rear wall of the fridge. Clear a blocked drain hole with the aid of the green peg in the pack of accessories included with the appliance. 7. After everything is dry place appliance back into service. Energy Saving Tips . Do not install the appliance near cookers, radiators or other sources of warmth. High ambient temperatures cause longer, more frequent operation of the compressor. . Ensure sufficient air circulation and exhaust at the appliance base and at the back wall of the appliance. Never cover air vent openings. . Do not place warm foods into the appliance. Allow warm foods to cool first. . Only leave door open as long as necessary. . Do not set temperature any colder than necessary. . Put frozen food in the fridge to defrost. The cold in the frozen food will then be used to cool the fridge. . Keep the heat emitting condenser, the metall grille on the rear wall of your appliance, always clean. What to do if ... Correcting Malfunctions A malfunction may be caused by only a minor fault that you can rectify yourself using the following instructions. Do not perform any other work on the appliance if the following information does not provide assistance in your specific case. Warning! Repairs to refrigerators/freezers may only be performed by qualified service engineers. Improper repairs can give rise to significant hazards for the user. If your appliance needs repairing, please contact your specialist dealer or our Customer Service. Malfunction Appliance does not work. Appliance cools too much. The food is too warm. Interior lighting does not work. Heavy build up of frost, possibly also on the door seal. Possible Cause Appliance is not switched on Switch on the appliance. Mains plug is not plugged in or is loose. Fuse has blown or is defective. Socket is defective. Temperature is set too cold. Turn the temperature regu- Temperature is not properly adjusted. Door was open for an extended period. A large quantity of warm food was placed in the appliance within the last 24 hours. The appliance is near a heat source. Light bulb is defective. Door seal is not air tight (possibly after changing over the hinges). Remed...

Эта инструкция также подходит к моделям:
Холодильники - KO SANTO 290-6I (186.57 kb)
Холодильники - KO SANTO 290-6I (186.57 kb)
Холодильники - KO SANTO 290-6I (186.57 kb)
Холодильники - KO SANTO 290-6I (186.57 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории