Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
2 Fig. 3 5 6 7 8 9 10 11 12 13 14 15 1 2 3 4 2.3 Operating principle This extractor hood swiftly and silently extracts all odours produced while cooking. You can set different intensity levels depending on the intensity of odours. The fan in the extractor hood sucks in the kitchen vapours and passes them through the grease filter to outdoors. The grease filter absorbs the greasy components in the kitchen vapours (see Fig. 4). Fig. 4 Fig. 5 The “Coanda effect” Kitchen vapours are extracted even better with the “Coanda effect”. By means of an additional motor, kitchen vapours are passed swiftly and effectively into the hood’s extraction zone. An additional fan on the front edge of the kitchen extractor hood generates an air stream that is diverted around a cylinder towards the rear. This ensures that kitchen vapours are routed completely into the extractor hood’s filter area (see Fig. 5). 3. Operation 3.1 Switching on and off Fig. 6 0 0 1 2 Fig. 7 Fig. 8 0 0 1 2 3 Switching on – Turn the “Ventilation level” control knob to the ventilation level you require (Fig. 6). – The set level is displayed. After a power failure, the extactor will not go on again automatically. You can recommence operation by turning a knob or by pressing any key. Switching off – Turn the “Ventilation level” control knob to the 0 position (Fig. 7). – The set level 0 is displayed for a few seconds. Note: The light can be switched on and off at any time. To do this, turn the “Light” control knob to the (Light) position. Switching on the Coanda level – Turn the “Ventilation level” control knob to the level you require. – Press the Coanda level key. – The level you have set and the Coanda level symbol appear on the display (Fig. 8). Note: You can change to any ventilation level, and the Coanda level remains set. Switching off the Coanda level – Press the “Coanda level” key or turn the “Ventilation level” knob to the 0 position. 8 3.2 Special functions Intensive level You should select the intensive level when browning and frying in an open pan. Switching on: (Fig. 9) – Turn the control knob to a ventilation level (1-3). – Press the intensive level key. The intensive level symbol appears on the display. The previously selected ventilation level flashes on the display. After a few minutes, the appliance switches back automatically to the previously selected ventilation level. or – Press the intensive level key. The intensive level symbol appears on the display. The appliance is now operated at the intensive level for a few minutes and then switches off automatically. Ending the intensive level prematurely: – Turn the “Ventilation level” knob to the 0 position or – turn the “Ventilation level” knob to any level or – press the intensive level key once again. After-running Switching on: – Press the (After-running) key. – The (After-running) symbol and ventilation level 2 light up on the display (Fig. 10). or – Turn the “Ventilation level” control knob to any level. – Press the (After-running) key. – The (After-running) symbol and the set ventilation level light up on the display (Fig. 11). – The extractor hood continues running for 10 minutes. Switching off: – Turn the “Ventilation level” control knob to the 0 position. or – Press the (After-running) key. 0 0 1 2 3 Fig. 9 Fig. 10 Fig. 11 0 0 1 2 3 4. Cleaning and care Fig. 12 Note: The handles of the grease filters must be visible after installation. They can no longer be removed if the handles are in the inner part of the housing. Caution! Over-greased filters are a fire risk! Pay attention to cleaning the grease filter on a regular basis. Cleaning the grease filters: The (Grease filter saturation) symbol flashes on the display after an operating time of 30 hours. Flashing of this symbol signals to you that the grease filters have to be cleaned. The grease filters can be cleaned at any time, even if the (Grease filter saturation) symbol does not flash. The metal filters can be removed easily for cleaning. Proceed as follows: – Grip the grease filter handles and press the slide towards the rear. – Pull the grease filter out of its mount in the downward direction (Fig. 12). – Repeat the operation with the other grease filters. You can clean the metal grease filters in a dishwasher at a maximum temperature of 65 °C. Place the grease filters vertically in the dishwasher to ensure that no food remainders will stay on them. Slight discoloration can occur when cleaning the grease filters in a dishwasher. When replacing the grease filters, wipe out the inner part of the housing with hot detergent solution. Reinsert the grease filters in the hood after cleaning. Install them in the reverse order to removal. Press the (Grease filter) key to set the elapsed hours counter to zero; the (Grease filter) symbol stops flashing. Do not clean the appliance with a steam cleaning apparatus or with water pressure because this poses a risk of short-circuits. Cleaning the glass plates Apply commercially available windo...
Эта инструкция также подходит к моделям:Вытяжки - AH360120/02 (798.56 kb)
Вытяжки - AH360120/03 (798.56 kb)