Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
.... .... .... .... .... .... .... .... .... .... .... .... .... .. QuietFlo Filter Pre-Filter Filter Reset 012 3 Figure 1 - Models 30117, 30119 & 30145 HEPA Filter Pre-Filter Front Grill Buttons for opening the front grill Tabs for opening the front grill HEPA Filter Pre-Filter Front Grill Figure 2 - Models 30095, 30214 & 30215 Figure 3 Hook Tape Grill Vents Hook Tape 41478_Purifier_REV 3/25/04.indd 3 3/25/04, 5:13:20 PM 4 ® Operating Your Air Purifier On/Speed Control: Rotate the Speed Control knob to set the desired speed. A setting of zero (0) indicates that the unit is off, one (1) is low speed, two (2) is medium speed, and three (3) is high speed. The fan speed can be adjusted at any time. Pre-Filter and Filter Timers This air purifier contains timers that indicate when the pre-filter and filter should be changed. The timer automatically counts the number of hours that each filter has been in use. When the pre-filter counter reaches 2000 hours (approximately three months of use), the pre-filter indicator will be lit to show that the pre-filter should be changed. When the HEPA filter counter reaches 8000 hours (approximately one year of use), the HEPA filter indicator will be lit to indicate that the filter should be changed. The exact life of the pre-filter and filter will depend upon the environment. If necessary, the filters should be changed more frequently. The reset the pre-filter or filter timers when one indicator (or both) is lit: 1. Change the fi lter and/or pre-fi lter as described in the Maintenance section of the manual. 2. To reset the counter to zero hours and turn off the indicator, simply press and hold the filter reset key for three seconds. If both the pre-filter and filter indicators are lit, the reset key will first turn off the pre-filter indicator. Then, you must release the reset key and then press and hold the filter reset key again for three seconds to turn off the filter indicator. The reset the pre-filter or filter timers before the indicators are lit: In some environments, you may want to change the pre-filter or filter more frequently than indicated by the filter indicators. This procedure allows you to reset the pre-filter or filter counter before the indicators are lit. 1. Change the fi lter and/or pre-fi lter as described in the Maintenance section of the manual. 2. Now, you must choose which timer you want to reset. Press and hold the filter reset key (approximately three seconds) until the pre-filter indicator flashes. Press the reset key again to alternate between the two indicators. The timer that will be reset is designated by the flashing indicator. 3. Once you have the correct indicator flashing, press and hold the reset key for three seconds to reset that timer to zero hours. The indicator will stop flashing when it has been reset. If needed, repeat these steps to reset the other timer. 41478_Purifier_REV 3/25/04.indd 4 3/25/04, 5:13:21 PM ® ® 5 Cleaner and...
Эта инструкция также подходит к моделям:Воздухоочистители - 30095 (2.21 mb)
Воздухоочистители - 30145 (2.21 mb)
Воздухоочистители - 30215 (2.21 mb)
Воздухоочистители - 30117 (2.21 mb)