Оценок - 1, средний балл: 5 ( )

Производитель: Fujitsu Размер: 855.98 kb Название файла: Язык инструкции:

The log is displayed in the order of timestamps, starting from the latest timestamp. xscf> showlogs power -t Mar3017:302005 -T Mar3017:492005 -r Date Event Cause DID Switch Mar 30 17:45:31 JST 2005 Domain Power Off Operator 00 Locked Mar 30 17:35:31 JST 2005 System Power On AC Restored -- Locked EXAMPLE 8 Displays the specified date of a power log. Data with this date or later in the log is displayed. xscf> showlogs power -t Mar3017:302005 Date Event Cause DID Switch Mar 30 17:35:31 JST 2005 System Power On AC Restored -- Locked Mar 30 17:45:31 JST 2005 Domain Power Off Panel 00 Locked Mar 30 17:50:31 JST 2005 Domain Power On Operator 00 Service EXAMPLE 9 Displays a console message log of the domain ID 0. xscf> showlogs console -d 00 DomainID:00 Mar 30 17:45:31 JST 2005 Executing last command: boot Mar 30 17:55:31 JST 2005 disk@0,0:a File and args: Mar 30 17:55:32 JST 2005 Boot device: /pci@83,4000/FJSV,ulsa@2,1/ SunOS Release 5.10 Version Generic 64-bit Note: The codes or messages shown here may differ from those actually displayed. The following exit values are returned: 0 >0 Successful completion. An error occurred. System Administration 399 showlogs(8) 400 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008 NAME SYNOPSIS DESCRIPTION Privileges OPTIONS EXAMPLES EXIT STATUS SEE ALSO showlookup(8) showlookup - display the configuration for authentication and privileges lookup showlookup showlookup -h showlookup(8) displays configuration settings for authentication and privileges. You must have useradm or fieldeng privileges to run this command. Refer to setprivileges(8) for more information. The following option is supported: -h Displays usage statement. EXAMPLE 1 Displaying Settings for Authentication and Privileges xscf> showlookup Privileges lookup:Local only Authentication lookup: Local and LDAP The following exit values are returned: 0 Successful completion. >0 An error occurred. setlookup (8) System Administration 401 showlookup(8) 402 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised January 2007 showmonitorlog(8) NAME SYNOPSIS DESCRIPTION Privileges OPTIONS EXAMPLES EXIT STATUS showmonitorlog - display the contents of monitoring messages in real time showmonitorlog showmonitorlog -h The showmonitorlog(8) command displays the contents of monitoring messages in real time. When executed, the showmonitorlog(8) command will not terminate in order to display the monitoring message log, and the XSCF shell is occupied for the display. When a monitoring message is registered, the contents of the message are displayed. To stop the real-time display, press the "Ctrl" and "C" key combination. You must have one of the following privileges to run this command: platadm, platop, fieldeng Refer to setprivileges(8) for more information. The following option is supported: -h Displays usage statement. EXAMPLE 1 Displays the contents of a monitoring message in real time. xscf> showmonitorlog Apr 13 12:32:16 XXXXX Alarm: /CMU#1,/CMU#0/DDC#0:ANALYZE:SC-IOU I/F fatal error 0x00000000; The following 0 >0 exit values are returned: Successful completion. An error occurred. System Administration 403 showmonitorlog(8) 404 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008 NAME SYNOPSIS DESCRIPTION Privileges OPTIONS EXTENDED DESCRIPTION EXAMPLES EXIT STATUS SEE ALSO shownameserver(8) shownameserver - display the registered domain name system (DNS) servers specified on the XSCF network shownameserver shownameserver -h shownameserver(8) command displays the registered DNS servers in the XSCF network. You must have one of the following privileges to run this command: useradm, platadm, platop, auditadm, auditop, domainadm, domainmgr, domainop, fieldeng Refer to setprivileges(8) for more information. The following option is supported: -h Displays usage statement. The setnameserver(8) command sets the DNS servers used in the XSCF network. EXAMPLE 1 Displays the DNS servers currently set for the XSCF network. The following example shows that three DNS servers have been set: xscf> shownameserver nameserver 192.168.1.2 nameserver 10.18.108.10 nameserver 10.24.1.2 EXAMPLE 2 Displays the DNS servers currently set for the XSCF network. The following example shows that no DNS server is set: xscf> shownameserver The following exit values are returned: 0 Successful completion. >0 An error occurred. setnameserver (8) System Administration 405 shownameserver(8) 406 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised January 2007 shownetwork(8) NAME SYNOPSIS DESCRIPTION Privileges OPTIONS shownetwork - display information of network interfaces for XSCF shownetwork [-M] {-a I -i I interface} shownetwork -h shownetwork(8) command displays current information of network interfaces for XSCF. Information on the specified network interface o...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: