Please read completely before operating your machine. 1.1 Definitions The operating definitions provided below will help you further understand your machine and this manual. 1.1.1 Permeate Rate (Product Water Rate) [Qp] The Permeate Rate is the flow rate of purified water that passed through the membrane element and out of the membrane element in liter/min (Lpm), cubic meters/hour (m3/h), gallons/min (gpm) or gallons/hour (gph). Specified permeate rates are based on a feed water temperature of 2

Examples include: remote ON/OFF, posttreatment lockout, etc. WARNING: DO NOT CONFIGURE PRETREATMENT DEVICES FOR PURGE-ACTIVATED SHUTDOWN. THE PURGE CYCLE REQUIRES THE FEED WATER SUPPLIED BY THESE DEVICES. To establish the control loop for purge-activated shutdown, perform the following steps: WARNING: BEFORE OBTAINING ACCESS TO TERMINALS, ALL SUPPLY CIRCUITS MUST BE DISCONNECTED. STEPS 1. Establish that the remote device(s) has dry contacts available to provide the shutdown signal to the RO. 2.

A nearby shutoff valve is convenient. Most sinks already have shutoff valves on the supply pipes. Cold Water supply valve Tubing insert Tubing adapter Compression nut Water in Water out Tubing Insert Mounting screw (2) Nut Tubing Locate the drinking water system on the cold water supply pipe, under the kitchen and/or bathroom sink, to filter the cold drinking water. Model GX1S04C only Use to connect the tubing Turn off the cold water supply and attach saddle valve as shown in illustration at rig

This manual is a reference and will not include every system installation situation. The person installing this equipment should have: • Knowledge of water conditioning and how to determine proper Left Side Right Side control settings • Basic plumbing skills • The directional instructions "left" and “right" are determined by looking at the front of the unit. Icons That Appear In This Manual WARNING: Failure to follow this instruction can result in personal injury or damage to the equipment. NOTE

The words “Regeneration Time” will scroll through the banner display. To change the regeneration time press and hold the UP or DOWN button until the desired regeneration time is displayed. Press SET to lock this time into memory. NOTE: When the controller is set up for a twelve hour clock a PM indicator will illuminate when the displayed time is in the PM hours. There is no indicator for the AM times. Level I Programming Rev A Level II Programming Level II program parameters are those parameters

Save This Manual For Future Reference. I:RI:IFTSMI:IN° PROFESSIONAL 1/2 HP SHALLOW WELL WATER SYSTEM • Safety Instructions • Installation • Electrical • Maintenance • Repair Parts Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. PRINTED IN USA Form No F642-04075 (8/3/o4) CONTENTS INTRODUCTION INTRODUCTION/WARRANTY 2 Please read our mstructions before mstallmg and usmg }'our PUMP PERFORS*L_CE 3 Shallow Well Water System Tilts will help you obtain the full benefits of the qua]ity and conve

Save This Manual For FutureReference. CRAFTSMAN° PROFESSIONAL 112 HP SHALLOW WELL WATER SYSTEM • Safety Instructions • Installation • Electrical • Maintenance • Repair Parts Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. PRINTED IN U.S.A. Form No. F642-9823 (9/2S/98) CONTENTS INTRODUCTION INTRODUCTION/WARRANTY .......................................... 2 Please read our instructions before installing and using your PUMP PERFORMANCE ......................................................

VALVE OUTLET i OPEN A NEARBY SOFT WATER FAUCET i 000 to 199 (continuaD = Repeats display for each gallon of water passing through the meter. B° The letter (P) and clash (or dashes) indicate POSI- If you don't get a reading in the display, with the TION switch operation. If the letter appears, the faucet ()pen, pull the sensor from the valve outlet switch is closed. If the clash shows, the switch is port. Pass a small magnet back and forth in front of ()pen. the sensor. You should get a reading i

If you have questions when installing, operating or maintaining your softener, and when setting the timer, call this toll-free number... 1-800-426-9345 SAVE THIS MANUAL Water Softeners _i, Warranty Start Up / Setting Timer _i, How It Works _i, Care Of _i, Specifications Repair Parts Use plastic bag and tie provided, to hang manuals nearby the softener for future reference. Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA PRINTED IN U.S.A. WARRANTY II SEARS RESIDENTIAL WATER SOFTENER FULL TE

// placement face place, /_ the valve is not in ser-__,_ vice positio_, 7o the following to assure correct __ff-_( ! cycle orientation, or tim-_ valve Position Valve ing, between the face cam Indicator plate and valve. Use the MANUAL ADVANCE procedures, page 23. With the RECHARGE NOW button, advance through the recharge cycles until the valve stops in service position, and RECHARGE no longer flashes in the timer. NOTE: The valve motor may automatically drive through several valve positions while