Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
The product range comprises glasswashers, pot and pan washers, undercounter, hood type, rack type and flight type dishwashers. The Reverse Osmosis Filter described on this sheet is suited for installations in which high quality rinsing and spot-free drying and low operational costs are required. It has been specifically designed to be used with our glasswasher, undercounter and hood type machines. Thanks to the Reverse Osmosis technology, all the impurities (salt, particles and bacteria) contained in the water are completely removed, eliminating any deposit on the glassware and silverware, thus guaranteeing shiny and spot-free results. EASY TO INSTALL • The reverse osmosis filter treats the water before it feeds into the dishwasher. Available in two versions: one for atmospheric machines and one for pressure machines; the version for pressure machines is equipped with a buffer tank to guarantee the dishwasher minimum working pressure. • When used with hard water (water hardness > 27 fH), a polyphosphate filter is recommended to reduce membrane damage and the need for descaling. The unit can be used with a maximum hardness of 45 fH (or 2000pS/cm conductivity). For harder water, a softener should be installed. • Nominal flow rate is 300 liters/hour. • The reverse osmosis filter requires cold water (min 2 °C, max 30°C) and feeding water pressure between 2-10 bar. EASY TO USE • The unit is a multi-step physical filter: a built-in prefiltering device (sediment filter and an active carbon filter) eliminates particles, chlorine and possible odors from the water; the final filtering level uses the "reverse osmosis" principle pushing high-pressure water through a semi-permeable membrane to remove more than 95% of salt and impurities. • Clear control lights on the front cover allow the user to constantly check the water quality. EASY TO CLEAN • Impurities and bacteria retained by the membrane are eliminated by means of a self-cleaning system. Automatic membrane flushing occurs every 15 minutes during continuous operation or at the end of each operation cycle. EASY TO MAINTAIN • The use of softened water dramatically increases the life of the unit and reduce the need for descaling. EASY ON THE ENVIRONMENT • Developed and produced in an ISO 9001 and ISO 14001 certified factory. • CFC free packaging. C € 0] Electrolux TECHNICAL DATA REVGSM5ATM 864026 External dimensions - mm width 225 depth 466 height 460 Net weight - kg. 29 Temperature - °C 2-30 Pressure - bar 2-10 Internet: Subject to change without notice 2012-01-16 IOA0010 External reverse osmosis filter Electrolux Water Treatment...
Эта инструкция также подходит к моделям:Водоочистители - 864027 (74.04 kb)
Водоочистители - REVOSM5ATM (74.04 kb)
Водоочистители - REVOSM5PRE (74.04 kb)