Оценок - 3, средний балл: 4.3
(
)
)
|
К этому устройству также есть другие инструкции:
Телевизоры - KDL-40V5800 (11.98 mb)
Телевизоры - KDL-40V5800 (12.52 mb)
Фрагмент инструкции
However, power consumption in standby mode is approximately 20 watts higher than usual. Up to 3 out of 5 time zones can be set. 90/119 Set-up AV Preset Assigns an icon or name to equipment connected to the side and rear sockets/jacks. The icon and name appear briefly on the screen when you select the equipment. 1 Press to select the desired input source, then press . • Skip AV Inputs: For each input, sets whether or not to display on the Home Menu or in a list of inputs that will appear when you press . - Auto: Displays the icon and name only when the equipment is connected (except for AV1 or AV2 inputs). - Always Display: Always displays the icon and name regardless of whether or not the equipment is connected. -Skip: Does not display the icon and name even if the equipment is connected. 2 Press to assign an icon and name. • Label AV Inputs: Uses preset labels to assign a name to connected equipment. Allows you to create your own label when you select “Edit”. - Edit: Allows you to edit the name in the edit screen and choose the appropriate icon. 91/119 Set-up AV2 Input Sets a signal to be input through the socket labelled / / AV2 on the rear of the TV. • Auto: Switches automatically among the signals of RGB input, S video input, Composite video input depending on the input signal. • RGB: Inputs the RGB signal. • S Video: Inputs the S Video signal. • Composite: Inputs the Composite video signal. AV2 Output Sets a signal to be output to the // AV2 socket. If you connect a VCR or other recording equipment to the / / AV2 socket, you can record the output signal from other equipment connected to the TV. • This function may have some restrictions depending on the input displayed. • TV: Outputs TV broadcasts. • AV1: Outputs signals from equipment connected to the / AV1 socket. • AV3: Outputs signals from equipment connected to the AV3 socket. 92/119 Set-up • Auto: Outputs whatever is being viewed on the screen (except signals from the / COMPONENT IN, HDMI IN1, 2, 3, or 4, and PC IN / sockets). HDMI Set-up Allows the TV to communicate with equipment that is compatible with the Control for HDMI function, and connected to the HDMI sockets/ jacks of the TV. Note that communication settings must also be made on the connected equipment. • Control for HDMI: Sets whether or not to link the operations of the TV and the connected equipment that is compatible with Control for HDMI. When set to “On”, the following functions are available. If the specific Sony equipment that is compatible with Control for HDMI is connected, this setting is applied to the connected equipment automatically when the “Control for HDMI” is set to “On” using the TV. • Auto Devices Off: When this is set to “On”, the connected equipment that is compatible with Control for HDMI turns off when you turn off the TV. • Auto TV On: When this is set to “On”, the TV turns on when you turn on the connected equipment t...
Эта инструкция также подходит к моделям:Телевизоры - KDL-46V5800 (11.97 mb)
Телевизоры - KDL-46V5810 (11.97 mb)
Телевизоры - KDL-52V5800 (11.97 mb)
Телевизоры - KDL-52V5810 (11.97 mb)