Оценок - 5, средний балл: 4.2
(
)
)
|
Фрагмент инструкции
If maintenance is needed, please contact local service station. FAQ Phenomenon Confirmation items Remedy Check Check and clear Check and open Check power socket Keep heating Keep heating Adjust temperature of water Contact with service department when are excluded Contact with service department when are excluded Contact with service department when are excluded Adjust the flux of outlet water Adjust the flux of outlet water or use with constant water pressure Adjust setting water temperature No water supply or water pressure too low Hot water access close Hot water access close No power to heater Temperature not set to desired setting Uncontrollable thermostat heating time limit and setting temperature not obtain Defective heater Setting water temperature not obtain Temperature set too low uncontrollable thermostat Excessive water pressure Unconstant water pressure No water Only cold water but pointer light when heat Only cold water and pointer not light when heat Heating pointer always light Insufficient hot water Unconstant flow and temperature of water Dear users, Thanks for choosing Haier water heater product. Haier products have good quality and excellent performance. To facilitate you to use the product, please read the manual and operate accordingly. Please retain it for future reference. The international star service of Haier Group will always accompany you. No matter what kind of problems you meet in usage, please contact with the local after -sales service agent. We are at your service all the time. Thanks again for choosing Haier Product. The water heater you purchased may not full comply with the manual due to the improvement of product. We apologize for the inconvenience occurred therefrom. Model Volume Net weight kg a1 b1 c1 d1 e1 f1 FCD-JTHA60- (ET) FCD-JTHA80- (ET) 305 521 100 100 437 440 400 400 795 991 20.5 26.6 60L 80L 200 200 30L 50L 569 694 366 438 347 400 100 100 192 220 15.1 18.5 200 200 FCD-JTHA30- (ET) FCD-JTHA50- (ET) FCD-JTHA40- ET 40L 16.5 688 391 100 220 353 200 mm mm mm mm mm mm Rated temperature 75 75 75 75 75 Dimensions 3 Electric Circuit Diagram (Figure 1) L N E BT HL EH E MT L:Brown wire N:Blue wire MT: High temperature limiter BT: Thermostat HL:Heating indicator EH:Heating element E:Yellow/green wire Parameters Rated voltage: 220V~,50Hz Dimension: (See to Figure 1) Rated power: 1200W Weight: (See to Figure 1) Rated pressure: 0.75MPa Volume: (See to Figure 1) Waterproof grade: IPX4 Tap water pressure: no less than 0.05MPa For the first use after installation, due to there's no water within the tank, first the city water inlet valve and mixing valve must be opened. Close the mixing valve when water flows out continuously from the showerhead or other outlets (the tank is full). Check connections are free of water leakage, and insert the power plug. Turn the knob to set your desired water heating temperature, which can be stepless changed between cold water inlet temperature and 75 . In heating mode, heating lamp is lighted on. Normally the knob shall be positioned at highest temperature. This machine ha...
Эта инструкция также подходит к моделям:Водонагреватели - LITTLE SEA-OX FCD JTHA30- ET (1.65 mb)
Водонагреватели - LITTLE SEA-OX FCD JTHA50- ET (1.65 mb)
Водонагреватели - LITTLE SEA-OX FCD JTHA40- ET (1.65 mb)
Водонагреватели - LITTLE SEA-OX FCD JTHA80- ET (1.65 mb)