When you play back the recording file, you can use the scroll box to drag it to go forward/backward to the desired video. The system shows the recording resolution of each channel and the frames on the upper left corner of each screen. When you play the video in 1-Cam mode, you will see some color blocks on the slider. BLUE blocks mean recorded videos are available. Green blocks mean there is detected motion during the time segment. Black blocks mean no data recorded. Yellow blocks mean alert ev

You can choose from 8, 4, 2, 1, 1/ 2, 1/ 4, and 1/ 8 times of the normal speed. 6. Image Quality Click to adjust the image quality. You can adjust the brightness, contrast, color and saturation. 88 AVerMedia User’s Manual EYES Pro/MP2016/ MP3000/MP5000 7. Zoom Click / to zoom in/out the image. 8. Print & Save During playback, you can click the Print or Save buttons to print or save the current image. Note that every image you save with the format of bmp. provides the functions of anti-counterfei

Record by weekday Click on the weekday button you would like to record. Make sure that you click the diamond next to the label Record by weekday. Start time Set the backup time in which you would like to start recording. Furthermore, the backup time will end according to the length of the schedule period. Schedule period Put a date number in days before backup date field to determine which days’ files you desire to backup. Set Start time and End time to 55 AVerMedia LX5000 User’s Manual perform

Up to four video cameras and four sensor devices can be hooked up to this DVR unit. It is also equipped with an output relay that allows connection of an alarm device. Surveillance, digital recording and playback are controlled through the front panel buttons. Users can connect EB-1004 BAK to a PC to trace back video files, and even save image as both BMP and AVI files. With the on-screen-display (OSD) menu, you can customize video recording settings, sensor and alarm settings, password protecti

4. In the Connection Settings section, select the Protocol where the PTZ camera is connected and IP Camera Site that IP or URL of IP camera. Then, click Save to keep the settings. 5. Use the IP PTZ control panel and adjust the position of the IP PTZ camera. 6. In the Preset Setting section, select the preset number to assign a number for the IP PTZ camera current position. Set the DwellTime (1-60 sec) for how long the IP PTZ camera stays in that position before it moves to the next one. If you w

brightness contrast color saturation 43 AVerMedia User’s Manual EYES Pro/MP2016/ MP3000/MP5000 Settings for the image properties are configured for the designated card, which may also connect to other cameras. That means, the settings you make for this camera will apply to other cameras that connect to the same card. The adjustment of image properties will result in inefficiency as the video format is set to be PAL for the unsupported hardware temporarily 5. PTZ Camera PTZ Camera Setup A. Select

25 Chapter 6 ImageVerification ...........................................................27 6.1 To Run the ImageVerification ................................................................... 27 Chapter 7 Warranty Notice..............................................................28 Chapter1IntroductionChapter1Introduction EB1304 MPEG4+ is a 4-channel stand-alone DVR unit that provides real-time monitoring and digital recording of surveillance video. Up to four video cameras and four sensor d

SENSITIVITY : Set the sensitivity level. The sensitivity is from H (High), 9~ 2 and L (Low). MOTION RECORD TIME : Set the amount of time (in second) to record when motion is detected. 20 Chapter 4 Using the USB Playback Console Chapter 4 Using the USB Playback Console 4.1 Recommended system requirements Pentium®4 2.4GHZ or above Windows®2000/ XP DDR 256 MB Graphic function must support DirectDraw Audio card or built-in Speaker 1 available USB2.0 port 4.2 Installing the USB Playback Console To in

In the Network and Dial-up Connections window, double-click Make New Connection to bring up the Network Connection Wizard. Click the Next button. B. Select Dial-up to private network and click the Next button. AVerMedia User’s Manual EYES Pro/MP2016/ MP3000/MP5000 C. Provide the server’s telephone number, including the area code, and click the Next button. D. Select For all users and click the Next button. 135 136 AVerMedia User’s Manual EYES Pro/MP2016/ MP3000/MP5000 E. Click the Finish button

To memorize channels using autoscan, choose AUTOSCAN from Menu-2 and select YES to start memorizing all the active TV channels. As AVerTV Box performs the search, it will display each channel number. You can interrupt and cancel the searching process anytime by pressing the Left or Right buttons on the remote. Now press the Channel Up/Down or Number buttons on the remote control. Check and verify that you can access all the TV channels available in your area. · Scan All Frequency If there are ch