Оценок - 5, средний балл: 4.4
(
)
)
|
Фрагмент инструкции
Up to four video cameras and four sensor devices can be hooked up to this DVR unit. It is also equipped with an output relay that allows connection of an alarm device. Surveillance, digital recording and playback are controlled through the front panel buttons. Users can connect EB-1004 BAK to a PC to trace back video files, and even save image as both BMP and AVI files. With the on-screen-display (OSD) menu, you can customize video recording settings, sensor and alarm settings, password protection, hard drive recycling, and more. Surveillance video is recorded in high-quality Motion-JPEG format. Two recording modes are available. EACH mode records video from each video camera in 640 x 224 resolution at 7.5 fps. QUAD mode records video in 320 x 112 resolution and up to 30 fps/ 25 fps (NTSC/PAL) . EB1004 BAK provides a removable rack for installing one hard drive and an internal slot for installing a second hard drive. Features and Specifications • Non- PC stand- alone security digital video recorder • 4 composite video inputs and 1 composite output • VGA output for LCD monitor display • Front panel buttons and OSD control • Motion- JPEG video compression • Factory defaulted to NTSC or PAL • Supports 2 hard drives (not included) 3 • Full-screen resolution: Display: 720 x 480 ( NTSC), 720 x 576 ( PAL) Recording: 640 x 224 ( NTSC) , 640 x 272 (PAL) • Display and recording frame rate: Quad mode: 30/25 fps ( NTSC/ PAL) per channel, total of 120/ 100 fps (NTSC/PAL) • Scheduled recording ( 00: 00~ 23:00 selectable) • Search for recorded videos by date/time/event • Input/Output: 4 sensor inputs and 1 relay output control • Motion detection recording. • Removable HDD bay • 1 USB 2.0 Port • Application driver CD ( for Windows 2000/XP) Front Panel 1 3 4 5 6 7 12 11 12 13 14 2 98 10 15 16 17 18 19 20 1 REC : Start video recording. 2 MENU : Open/ Close the OSD main menu or subsequent submenus. 3 .. : Go up one item. 4 .. : Go down one item. 5 SELECT : (a) Cycle through various options in a selected menu item. (b) Open a submenu 4 6 : (a) Display Channel 1 in full-screen. (b) When in the OSD menu, pressing button is equivalent to entering the number "1" . 7 : (a) Display Channel 2 in full-screen. (b) Pressing this button is equivalent to entering the number "2" when in the OSD menu. 8 : (a) Display Channel 3 in full-screen. (b) Pressing this button is equivalent to entering the number "3" when in the OSD menu. 9 : (a) Display Channel 4 in full-screen. (b) Pressing this button is equivalent to entering the number "4" when in the OSD menu. 10 : Display cameras in quad screen. 11 • : (a) Display the Playlist. (b) Play back a recording. 12 .. / • : (a) Pause playback. (b) Pause/Stop recording. 13 .. : Fast reverse during playback. 14 .. : (a) Fast forward during playback. (b) Toggle between the Playlist and the date/time search controls. 15 Removable hard disk rack with lock CAUTION BEFORE REMOVING THE REMOVABLE OR INTERNAL HARD DISK, POWER OFF THE DVR UNIT FIRST. 16 17 18 19 20 Removable Power LED Removable Hard disk LED Hard disk LED DVR Power LED USB2.0 Socket 5 Back Panel 31 2 54 6 1 VIDEO OUT ( BNC) : Composite video output for connection to a television monitor. 2 VGA OUT (15-pin D-Sub) : VGA output for connection to a VGA monitor. 3 CH1 ~ CH4 (BNC) : Composite video input for connection of up to four video cameras. ( Video input : V = 1 Vp-p) 4 Sensor Inputs and Relay Output : For connection of up to 4 sensor devices and an alarm device. (Relay : 1A @ 125V AC/30V DC) 5 Power Socket : For connecting the power adapter. (12V @ 4.2A) 6 . Hook: Fix the power adapter after it is plugged into Power Socket. Setting Up the DVR Unit Installing Hard Drives Before you install hard drives, please adjust the jumpers’ setting according to users’ demands. Please refer to your hard disk label to adjust jumpers’ settings. The DVR unit allows you to install up to two hard drives (a master and slave drive). Install the master hard drive inside DVR unit and fix it, and put the slave hard drive in a removable hard disk bay as the right picture shows. 6 Install the Hard Drive in a Removable Case 1. Remove the removable hard drive drawer from the case. 2. Remove the upper cover of the drawer. 3. Connect the power connector to the hard drive as the right picture shows. 4. Connect the hard disk connector into the inner tray’s slot. 5. Close the upper cover. Slide the drawer into the removable hard drive case. 6. Power on the unit to see the LED indicators on the triple frame holders. If the LED indicators light up, you may use the hard disk. 7 Install a Removable Hard Drive Case in a PC (Optional) For users who purchase an optional hard drive case, please follow the steps to install the case in a PC. 1. Power off your PC and remove the cover of your PC. 2. Remove a front cover and free a 5 1/ 4” drive bay. Insert the hard disk holder. Mount the hard disk holder, screw up the holder, and connect the IDE slot and power connector from PC’s motherb...